RAW REPORT

Without going thru this entire thread again,... does anyone have a service manual for a BM500x .? or just an exploded view .?
There really isn’t anything complicated about the RAW/ rapid guns, if it’s just a service all you need is a few tools and replacements o rings, anything technical just ask😉
 
There really isn’t anything complicated about the RAW/ rapid guns, if it’s just a service all you need is a few tools and replacements o rings, anything technical just ask😉
Thank you.. I figured there not complicated but haven't went into mine yet other then barrel change, as Martin went thru it right before I acquired it. I like to do all my own service work . Ill get some spare parts on the way..orings, etc..
One question is there is a very small grub on the cylinder of the probe area on RH side. What does this retain?
Joe
 
Thank you.. I figured there not complicated but haven't went into mine yet other then barrel change, as Martin went thru it right before I acquired it. I like to do all my own service work . Ill get some spare parts on the way..orings, etc..
One question is there is a very small grub on the cylinder of the probe area on RH side. What does this retain?
Joe
If it’s where I think you mean (cocking bolt) then it’s to secure the pellet probe.
 
  • Like
Reactions: Jaxjax
RAW - BOTTLE VALVE not holding air or not allowing the bottle to filled?

Does the INTERNAL VALVE on RAW bottle NOZZLE contain an O-ring that can be changed out?

Have switched the bottle to other guns and pin pointed to problem to the bottle only.
External nozzle O-ring new, hence the problem is inside the nozzle.
There must be O-rings of some sort .............. :confused:

RAW sells a bottle neck for $35, but it only makes sense they can be fixed with an O-ring of something similar?
 
Last edited: