RAW REPORT
- Thread starter Hynzie
- Start date
These moderators are exclusive to me and my business, no barrel removal needed. Owners can install in seconds.
Upvote 0
Based of DonnyFL Emperor, rated to .45cal, its a beast, length will be in the 13-15” w/2” OD.
Upvote 0
So basically you just remove the 15” one Martin puts on and this one replaces it? And it’s a 2”OD rather then the 1-1/8 OD..out of curiosity what does it weigh?
Upvote 0
I’m convinced that the government has hacked into my email account and is blocking any emails sent from Sandra containing a UPS tracking number! I will have to watch for men in a white van, waiting to jump out in Long black trench coats later this week, waiting to snatch up the UPS package so it can’t be delivered in time to me. Ugh... why am I so stinkin impatient?!?!
Upvote 0
It’ll be a tab heavier than the carbon fiber, but not much, looking into a 2” Carbon Fiber body as well.
Upvote 0
Thanks.
.
.
.
.
.
well i just shot another 21 rounds out to 75 yards and was tethered to the tank but my field pod isn’t the best to use indoors,I extended the legs about 12” with pvc pipe and it made it really shakey, the best I can do is 2-1/2” 2-3/4 groups maybe I’ll open my Christmas present early with my wife’s blessing(better safe then sorry). I would use a table but I need to be higher then my Deck Railing..
.
.
.
.
.
well i just shot another 21 rounds out to 75 yards and was tethered to the tank but my field pod isn’t the best to use indoors,I extended the legs about 12” with pvc pipe and it made it really shakey, the best I can do is 2-1/2” 2-3/4 groups maybe I’ll open my Christmas present early with my wife’s blessing(better safe then sorry). I would use a table but I need to be higher then my Deck Railing..
Upvote 0
Woohoo!!!! I just got the Quantum View UPS email that the gun is ready for pickup, so i have a tracking number today! I hope it gets picked up today or I will really be risking it making it to me this week still.
Super excited. Them black trench coats couldn’t intercept the email fast enough, haha!
Upvote 0
Just got confirmation my gun was actually ‘picked up’ today! Scheduled delivery is Thursday!!! Finally!
Upvote 0
Not directly, but RAW has a replacement o-ring kit as a spare part on the RAW website, under ‘parts - RAW’, that should have all the right o-rings in it (sizes AND materials).
Upvote 0
Salticon,
Are moderators like these under the control of the ABTF? Is a stamp required?
Craig
Upvote 0
Interesting-Does DonnyFL make anything for the RAW that is like 10.5" long like the one shown in the photo above with the tape measure instead? I can deal with a larger diameter, but would prefer a shorter length if I can get an equivalent sound, or lesser from the larger diameter.
Upvote 0
Imold: where did you find this picture of the stock from? I too really like that one-the front end seems to mimic a FWB stock. I wouldn't mind something like that (without the finger grooves) for a future stock myself."Imold"This is what I want as far as stock goes.
Sean
Upvote 0
This is off RAW's Facebook page, Martin only had 2 of these special order Blue blanks, he made this one and when I called he sill had the other one in stock so I got lucky, it was a bit more expensive but worth it."SMH77"
Imold: where did you find this picture of the stock from? I too really like that one-the front end seems to mimic a FWB stock. I wouldn't mind something like that (without the finger grooves) for a future stock myself."Imold"This is what I want as far as stock goes.
Sean
I'll get a better pic of mine up in a day or so with good lighting.
Upvote 0
Sorry, I should have been more clear: while I do LOVE the color, I was actually refering to the 'cut' or 'shape' of the stock. Is this one of the target stock versions? Oh, wait, I see it has the skinnier air cylinder on it so it likely can't work with one of the CF bottles..."Imold"
This is off RAW's Facebook page, Martin only had 2 of these special order Blue blanks, he made this one and when I called he sill had the other one in stock so I got lucky, it was a bit more expensive but worth it."SMH77"
Imold: where did you find this picture of the stock from? I too really like that one-the front end seems to mimic a FWB stock. I wouldn't mind something like that (without the finger grooves) for a future stock myself."Imold"This is what I want as far as stock goes.
Sean
I'll get a better pic of mine up in a day or so with good lighting.
Sean
Upvote 0
LOL no special permission or pass to have a “for airgun use only” part. Its just if you ordered a DonnyFL LDC..
Upvote 0