Thanks They look a whole lot cleaner for sure. Are you shooting .25 cal in an HM1000X? If so what do you prefer?
Craig
Upvote 0
RAW REPORT
- Thread starter Hynzie
- Start date
Craig
Hey guys just checking in and saying HI.. I have been out shooting my .30 and the wildcat 25 but it’s all steel so no pics to put up but I’m having fun from 15 yards to 100 yards, the 25 with the Marksman 10x42 is doing just fine and the Aztec Emerald is holding up on the HMx .30, still need to shoot the HMx 357 some more and the Texan 45 has been feeling left out but I still have to say that the 30 is still my go to. I have decided to hold off till fall before adding a RAW .25 to my collection guess I just want to enjoy the two RAWs I have now and see how the summer goes. It’s nice to see you guys still going at it with your RAWs so until next time shoot straight and keep your air dry hahaha.
Upvote 0
Jim,
Thanks for the update, good to hear from you again. Sounds like your having a good time.
Craig
Thanks for the update, good to hear from you again. Sounds like your having a good time.
Craig
Upvote 0
jps2486,
Thanks for the ratsniper tip. I sent email to them asking for advise and they replied in less than 10 minutes.
ordered some 31 gr and some 36 gr for the 25 cal.
Craig
Upvote 0
I’ve used Ratsnipers in my RAW .22 and .25. These guns like the heavier ones, but the length of the magazines limit what you can use unless you single load. The 25 likes the 31 gr. Ratsnipers measure 0.2495 and chamber much easier than the .250 types.
Upvote 0
The rat sniper slugs look interesting. I was looking at them during lunch break on my computer and clicked on the link to the hunting pics only to find a pop-up message that 'blocked' access from my organization with a note about '***********' not being valid use of company resources (or something like that). Hope I didn't trip somebody's trigger down in IT by viewing airgun ammo...
Sean
Sean
Upvote 0
Sean,
If they get here in time you can try some in my gun and have some to go when you leave.
Craig
If they get here in time you can try some in my gun and have some to go when you leave.
Craig
Upvote 0
https://www.ebay.com/itm/25-CAL-HOLLOW-POINT-PELLET-LARGE-HOLLOW-POINT-CUSTOM-SWAGED-32-80-GRAIN-50-COUNT/253627188775?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D50544%26meid%3D5424fb62dfbb486bb08f8df75cdfc3fb%26pid%3D100005%26rk%3D5%26rkt%3D12%26sd%3D253628207273%26itm%3D253627188775&_trksid=p2047675.c100005.m1851
Link to guy I buy .25 cal HP Slugs from. Great accuracy from my RAW.
Link to guy I buy .25 cal HP Slugs from. Great accuracy from my RAW.
Upvote 0
Just a few 5 shot groups at 50 yds with my 19 ft lb TM1000. Can easily be covered with a dime. .177 has become my go to rifle to shoot in my backyard. Getting about 125 shots per fill at 19ft lbs. The barrel i have in right now is a Lothar Walther and has a Optisan EVX 4-16x- 44mm FFP scope on it. Don't see much on the .177 RAWs on here so thought id share the love.
Upvote 0
Pat I got this at Christmas it's from X-stand...I got it on sale for a little over $100 and can't beat it for the price for a single shooter stand. It's really sturdy and it swilevs which is kinda cool.
X-Ecutor 360[/QUOTE]https://x-stand.com/product/the-x-ecutor-360/embed/#?secret=HuOpgu9bVj
There's a video link and pretty much explains all its features.
X-Ecutor 360[/QUOTE]https://x-stand.com/product/the-x-ecutor-360/embed/#?secret=HuOpgu9bVj
There's a video link and pretty much explains all its features.
Upvote 0
https://x-stand.com/product/the-x-ecutor-360/embed/#?secret=pZyX4tdnml
There's a video link and pretty much explains all its features.[/QUOTE]
K DOG i appreciate the quick responce thanks A lot pat
Upvote 0
in my limited testing, ive found the HP .22 and .25 very accurate with Neilsen slugs, more so with .22
Upvote 0
https://x-stand.com/product/the-x-ecutor-360/embed/#?secret=eHsBXQBaec
There's a video link and pretty much explains all its features.[/QUOTE]
“LET ME SHOW YOU IT’S FEATURES!” (Read with thick German accent)
Upvote 0
Dear RAW family members,
I need complete write up step by step servicing of RAW.
I sent a mail to Martin about adjustment of pellet probe and the tiny Allen key that I thought is required for adjustment but Martin says that the Allen key is not required in these new models.
I have worked in a few UK made theobetheobenTheobenwithout any issues but the RAW us a bit different in adjustment of pellet probe and tiny grub screw the the area around the probe.
I need complete write up step by step servicing of RAW.
I sent a mail to Martin about adjustment of pellet probe and the tiny Allen key that I thought is required for adjustment but Martin says that the Allen key is not required in these new models.
I have worked in a few UK made theobetheobenTheobenwithout any issues but the RAW us a bit different in adjustment of pellet probe and tiny grub screw the the area around the probe.
Upvote 0