Really wanted to push it

Peashooter

Member
Apr 9, 2021
3,760
3,050
Denmark
I was Shooting Sunday in really good weather, so my expectations was HIGH

But then upon unpacking i saw i forgot my hex tools at home, so not able to dial on the "rough" setup i had from home, so for sure not a flat shot string, but also not knowing how uneven i was CUZ i did not even bother putting the chrono on the rifle.

Still ! It was not half bad shooting the 2" Shoot NC targets at 75 M ( shooting 13.43 gr KO slugs )

First i put up 9 targets, and started to shoot 5 shot groups, which was sort of OK, and then after that i just hammered each target / Swiss cheesed them.

Then for the upper 3 targets i switched to shooting 3 shots after the 2 numbers and the red dot on each target,,,,,, and then Swiss Cheesing them after that.
But one of them i just had to pass on turning into Swiss cheese as the 3 shots was pretty damn good.

75M1.jpg


Then i put up 9 new stickers, and went to town again with the 5 shot groups, and again i was lucky so i just had to not Swiss Cheese one of them as aside for that one damn shot i got close making a 1/2 inch group.

75M2.jpg


TBH i think the #2 regulator on my Maverick,,,,,, it might have to forgo its location in favor of a Huma made one, i still have that one shot every 10 shots that just come off lower / slower than the other ones.

Clearly something was not quite as it was supposed to be CUZ i had to chase the POI with 1 clicks now and then on my turrets. ( no wind to blame )