N/A Regulating the Barra1100z 22cal Rifle

[billygee]

Nice rifle to tinker or modify

Considering installing a Lane Regulator

Would like to know if anyone has installed one yet and their results or find after install

Appreciate any input
Bill

 

[rdpjr6504]

BARRA air guns has a video showing them installing a reg in a 1100z .

 

[billygee]

BARRA air guns has a video showing them installing a reg in a 1100z .

Thank You

Yes they do, and viewed it

More interested on anyone on this site having any input after install.

 

[Rizz01]

Gotta drill out the transfer port and gauge block. Air doesn't flow well at all through this gun, hence why it is only a 40 yard gun. if you put a regulator in it without doing the drilling, the pellets will just about fall out of the muzzle. Had my hammer spring at 7 turns in to get accuracy at 50 yards with about 850 FPS. I'd fill it to 2900 psi and after 20 shots that left me with 2000 psi. My chrono stopped working (UGH!) right after the drilling but I am definitely getting more FPS with 6 turns in on the hammer spring. I suspect the pellets are moving too fast. Still getting 20 shots between 2900 and 2000 psi.