Have a Hatsun 25 caliber flashpup in wood. It's a 2021 with aluminum tank. Ordered a altaros regulator for it. Won't be here for a while. Just wondering from you guys who have installed it. Is it a pretty straight forward install? Where to start with regulator setting for best accuracy with 25 grain pellets? Accuracy is foremost then power. I have a chronograph as I reload for powder burners and am very comfortable with this. Any advice welcome.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Tuning Regulator setting for hatsan flashpup needed
- Thread starter actionpistol
- Start date
For a .25 I start at 1900psi and work from there. For the guns I have it's worked out well and I didnt have to tear the gun apart and adjust it.
Upvote 0
For a .25 I start at 1900psi and work from there. For the guns I have it's worked out well and I didnt have to tear the gun apart and adjust
Upvote 0
Thanks for the info. Sorry if this is a dumb question. But how do you adjust the regulator. Without taking apart the gun. When the regulator is inside the air tube?
Thanks in advance
Thanks in advance
Upvote 0
I guess I may have said it wrong. I didnt have to adjust the regulator after first install. Sorry that was a little misleading.
Upvote 0
Thanks that's even betterI guess I may have said it wrong. I didnt have to adjust the regulator after first install. Sorry that was a little misleading.
Upvote 0