Removing regulator on 9mm Cricket Bullpup

[tefloncoated]

Hi gents

Posted this on the other forum, but in big bore section, might not get noticed for a while.

Was wondering if anyone knows how to remove the regulator from the original 9mm cricket bullpup. What I see inside is completely different from what I have in my .25 Bullpup. The regulated chamber is huge, but there is no spacer, but what looks like a thick walled tube glued inside or machined as part of the air chamber. Tried pushing it out the other end – wouldn’t budge. Any ideas?

Thank you in advance

 

[sniperlabyo]

Here you go Mike!, after you unscrew the tube adapter from the supply air tube you can see the reg.

 

[tefloncoated]

Ernest to the rescue. Thank you sir - as always your knowledge and willingness to help is very much appreciated. Got it sorted out with your help - didn't even know the 9mm had that reservoir extension chamber.