reuse suppressors

[sat20387]

Do you use the same suppressor for multiple guns or do you get each gun it's own?

 

[cavedweller]

Do you use the same suppressor for multiple guns or do you get each gun it's own?

Reuse by putting an adapter on the various guns

 

[BABz58]

Do you use the same suppressor for multiple guns or do you get each gun it's own?

Swap them out.

 

[rcarlisle]

Re-use

 

[hotspark]

I have 2. I swap them both to multiple.

 

[sat20387]

What I mean is I have a Air Venturi .25 1/2 x20 .
The Barra .25 250 z I ordered should be in today which comes with a built in 1/x20 I can use the same suppressor right

 

[hotspark]

What I mean is I have a Air Venturi .25 1/2 x20 .
The Barra .25 250 z I ordered should be in today which comes with a built in 1/x20 I can use the same suppressor right

If the same thread diameter and pitch, yes

 

[jarmstrong]

every gun gets their own, I only swap to play around, have extras

 

[sat20387]

great, thank you for the feedback. now does anyone have the .25 Barra 250 Z ? If you do what suppressor do you use or what one would You use to be real quiet because I shoot in my indoor range in my cellar.

 

[Struckat]

Flavor of the day for some, others are dedicated to one gun.

 

[Gerry52]

3 guns, 1 can.

 

[john8]

Each gun gets its own moderator, too lazy to switch from gun to gun.

 

[sat20387]

good news boys and girls gun came in scope is on shooting dead center at 20 yards. (indoor range which is in my cellar) re: the suppressor I shot it with my donny ,25 and .30 suppressors. works good. I agree it needs it's own suppressor. Gonna look at Terry's stuff over at buck rail. I've got 3 of his already and I like em. does anybody have the segmented one an how do you like it an does it work well?

 

[Firewalker]

Do you use the same suppressor for multiple guns or do you get each gun it's own?

I'm printing my own and with a very good designer, I'm able to match the gun with the right moderator.

My Tanto was fine for my Bandit but as I evolved my desires for greater FPE and slugs, my need for better efficiency and sound pressure level drop, I had to look to the best designer and down the rabbit trail I went!

 

[beerthief]

I have 5 different makes , so swap to get the best sound reduction

 

[.20calguy]

What I mean is I have a Air Venturi .25 1/2 x20 .
The Barra .25 250 z I ordered should be in today which comes with a built in 1/x20 I can use the same suppressor right

I asked Utah Air Guns, if I needed new suppressor for my caliber conversion kit, from .30 to .22, and they said no. Just use it as normal.

 

[daddypaddy]

i re-use depending on where i’m shooting or if i want to be laughed at for a wimpy sounding gun

 

[Bandito]

Swap them if you hafta. But I try to have one for each barrel. Some Donnie's I swap. That's on PCP. Be Well Brothers, and quiet. B.

 

[CharlieF]

All except one came with a moderator already attached. My HW90 was the only one that came without one and I picked up Weihrauch moderator for it from Krale.

 

[blackdog899]

Do you use the same suppressor for multiple guns or do you get each gun it's own?

Yes , but another coming. I went cheap at first with 2 buckrails, works depending on gun.
so five guns three mods. Have Silent Thunder Ordnance accipiter now and a Huma coming .
Another gun coming so I’ll always have to move them