N/A Reximex Throne Gen 2... Good starter PCP?

[encore209x50]

Greetings all ! Got a few post under my belt but I am new here, and a total newbie to all things PCP....I do not yet own an air rifle of any type and am searching for my first. I was considering an FX Impact m4, but after some crawling around here I've decided against that notion. I've seen some favorable vids and talk of the Reximex Throne Gen 2, so kinda looking for some feedback from actual owners.
I like the bull pup design, my needs are mainly recreational shooting with some pest control mixed in, most likely nothing past 50 yards. I would like to go with .22 cal, but not against possibly going with .177 cal either. Pellets only, not really interested in slugs at this time.
The pump I am looking at is one of the GX CS3-I pumps, and possibly a smallish bottle for starters. Thanks to any and all for any guidance.

 

[thammer]

The Throne Gen 2 isn't a bad starter. In the bullpup world it checks a lot of boxes. They are typically very accurate out to 50 yards. Caliber swap options, easy to adjust the reg and hammer spring for tuning. Pretty darn good trigger and not terribly big, bulky, or heavy. And pretty affordable compared to many others that have those features.

 

[Scotay42]

Great choice. Good triggers on those. Not alot of power but very accurate when tuned right. For a regulated bullpup it is the best bang for the buck. I bought a Kuzey K300 from Troy and it is shooting a 15fps spread from 230bar to 160bar non regulated and 27-28 fpe with crossman pellets. Same hole.at 30yds and able to run my KYL target down to .5 inch no problem. The throne trigger can be made nicer, but for under under $500 it is hard to beat. Never a reg to creep with no reg.

 

[encore209x50]

Yet another to add to the possibility list

 

[Ranchibi]

A couple others to ponder would be an Avenger X and Umarex Zelos......and maybe an Umarex Notos.