RTI Arms Prophet 3 - IWA 2023

[Lingdinger.22]

Can talk only about my Prophet 1 Performance. Absolute tank.

Are they pretty easy to reseal?

 

[Spinach]

Are they pretty easy to reseal?

Probably the easiest PCP to work on and service.
Buy with confidence.

 

[airlexx]

not a lot of O rings

 

[Lingdinger.22]

Should I order through a dealer, or just direct from RTI Arms?

 

[Spinach]

Should I order through a dealer, or just direct from RTI Arms?

Use a USA dealer, that's my personal thought.
The RTIarmshop isn't RTI, same outfit has edgunshop, hubenshop etc.
It's not that they are bad to deal with. Just many think the are dealing with the manufacturer. Not so.
Marketing? !

 

[Lingdinger.22]

Use a USA dealer, that's my personal thought.
The RTIarmshop isn't RTI, same outfit has edgunshop, hubenshop etc.
It's not that they are bad to deal with. Just many think the are dealing with the manufacturer. Not so.
Marketing? !

Thanks

 

[Lingdinger.22]

How do they shoot the JSB .22cal 18.1 grain pellet?

 

[Spinach]

How do they shoot the JSB .22cal 18.1 grain pellet?

I don't have the P3, my P2 with the same barrel shoots the jsb 18.1 excellent.
Good luck.

 

[robbos]

I don't have the P3, my P2 with the same barrel shoots the jsb 18.1 excellent.
Good luck.

...as does the first one, the PRIEST...

 

[Lingdinger.22]

Awesome, thanks

 

[airlexx]

P3 is the ultimate upgrade from the previous models wich were already sweet! smoother cocking, “no tools required” hammer spring adjustment!
Etc… barrels have always been top notch!

I’m waiting for the Mora!… if it is to rich for my blood then the P3 is a nice succesor!

 

[IRBent]

I don't have the P3, my P2 with the same barrel shoots the jsb 18.1 excellent.
Good luck.

Excellent? Can you turn her down to around the 800fps or 250m/s range with those 18.13gr pellets? I thought that I had read the earlier versions of the Prophet was hard to turn down for lighter ammo.

 

[Triglav]

The shroud is more than that, the treaded breech end of the shroud is 15mm, a solid attachment, the shroud actually becomes part of the breech block. Stability.
The barrel breech fitting plus the crown centralising ring on the barrel add further stability. Very tight tolerances.
The shroud is a integral part of any RTI.
A simple but effective design.

Yes, you're exactly right, it's much more, than just what I've listed!

 

[Spinach]

Excellent? Can you turn her down to around the 800fps or 250m/s range with those 18.13gr pellets? I thought that I had read the earlier versions of the Prophet was hard to turn down for lighter ammo.

Not a problem, I often turn the power down, especially when shooting in my yard. 830fps working good for me with the 18.13 jsb.

 

[Spinach]

P3 is the ultimate upgrade from the previous models wich were already sweet! smoother cocking, “no tools required” hammer spring adjustment!
Etc… barrels have always been top notch!

I’m waiting for the Mora!… if it is to rich for my blood then the P3 is a nice succesor!

Ditto,
My next RTI is the Mora, .
I have already given the wife my intentions, no negative comments so far .

 

[airlexx]

Ditto,
My next RTI is the Mora, .
I have already given the wife my intentions, no negative comments so far .

Ai!!…. No comment? That is dangerous!!
If you have a garden and she starts diggin a hole….. RUUUUUNNN!!

 

[Lingdinger.22]

Is the Mora the one with the fancy shroud?

 

[SupremaRatio]

Are they pretty easy to reseal?

Yes they are but never needed. I usually change every "easy" orings every 6-8 months. I'm talking about reg, barrel, probe, bleed orings. Less than 15min work.

 

[SupremaRatio]

Is the Mora the one with the fancy shroud?

Yes it is

 

[airlexx]

Yes they are but never needed. I usually change every "easy" orings every 6-8 months. I'm talking about reg, barrel, probe, bleed orings. Less than 15min work.

I recently changed the O rings … but the old once were from 2019…
If i have to change O rings every six months i wil buy a Impact!