Hi guys,
I have the V2 valve with the steel end and changed the valve o-rings and the reg o-rings. I bottomed in the adjustment screw all the way in., and loosened it slowly until it let air in and leaked thru the barrel.
The gun was performing well at 160 bar until the reg leaked from the 'nipple'. When I inspected the o-ring at the nipple, it was blown up. But I replaced every o-rings in the regulator and the valve o-rings.
I used those two videos to disassemble the gun and replace the valve o-rings.
I think over adjusting out the reg adjustment screw should not cause any leak, the air at whatever pressure from the bottle would just pass thru the reg and it would behave as if it's unregulated. The o-rings on the valve looked fine to me but I replaced them anyway.
It's a mystery to me.
I have the V2 valve with the steel end and changed the valve o-rings and the reg o-rings. I bottomed in the adjustment screw all the way in., and loosened it slowly until it let air in and leaked thru the barrel.
The gun was performing well at 160 bar until the reg leaked from the 'nipple'. When I inspected the o-ring at the nipple, it was blown up. But I replaced every o-rings in the regulator and the valve o-rings.
I used those two videos to disassemble the gun and replace the valve o-rings.
I think over adjusting out the reg adjustment screw should not cause any leak, the air at whatever pressure from the bottle would just pass thru the reg and it would behave as if it's unregulated. The o-rings on the valve looked fine to me but I replaced them anyway.
It's a mystery to me.
Upvote 0