RTI Rti Mora 600mm 25 cal

[turbospud]

chrono reads correct on other guns.
has to be settings or barrel needs run in a bit
the reg pressure should dictate the fps as the hammer and valve are for fine tuning

 

[weevil]

chrono reads correct on other guns.
has to be settings or barrel needs run in a bit
the reg pressure should dictate the fps as the hammer and valve are for fine tuning

Curious. Did it come from Tony (Talon)? What speed do you see if you increase the hammer 1/2 turn and open the valve adjuster and does it get loud with the valve adjuster opened. Wondering if the adjuster is stuck…

 

[turbospud]

im in the uk,it came as set from the factory i think,the tamper plate for the hammer was locking it off and had anti tamper screws in it.
maybe the importer has stuck a sub 12 tune on it

will have another play when the temp comes up a bit,well below freezing at the moment

 

[greenbeans]

im in the uk,it came as set from the factory i think,the tamper plate for the hammer was locking it off and had anti tamper screws in it.
maybe the importer has stuck a sub 12 tune on it

will have another play when the temp comes up a bit,well below freezing at the moment

Damn! Would be the first FAC UK rifle being delivered with sub12 parts…

 

[weevil]

im in the uk,it came as set from the factory i think,the tamper plate for the hammer was locking it off and had anti tamper screws in it.
maybe the importer has stuck a sub 12 tune on it

will have another play when the temp comes up a bit,well below freezing at the moment

I guess things are a bit stuck then. Good luck.