Does anyone know what the threads are on the muzzle end of the RTI shrouds are? Looking for a moderator that might screw onto them rather than the 1/2 X 20 threads on the adaptor.
RTI Prophet II shroud thread
- Thread starter customcutter
- Start date
Hard to find a mod to fit directly on shroud but Donny FL DOES have an adapter. Why'nt you delete 4 of these 5 same post?
Upvote 0
My apologies, I didn't see any multiple post. Sometimes my laptop does that occasionally on the mouse pad. I have the sensitivity adjusted all the way down. It only does it on this site for some reason.
I have an adaptor for 1/2 X 20 threads. I was hoping to determine the threads and see if any of the Buck Rail moderators might screw into the shroud, and use some of the 4" available in the shroud.
Upvote 0
You put 5 daystate pulsar baffles and a small section of the daystate spring inside the extra 4" of shroud. It will work much better than leaving it as open space. Call Airguns of Arizona and buy them over the phone as they do not sell them online.
Upvote 0
Thanks, I had done a search before posting and saw that thread. I wasn't sure it would work with the 4" left in the shroud. From the write up I thought he was using a shorter barrel in the long shroud. I'll give them a call on Monday. Thanks again. Ken
Upvote 0
Shroud outer diameter is 25mm inner diameter is 22mm, the adapter size is 23mm, the thread looks like x1, 23mmx1 I'm guessing on the thread
Upvote 0