So how tall rings I do need to have to slap that scope on flat long rail as Sabre TRS without having fitting problems. With EO flip covers that comes with the scope itself..
FX Sabre TRS rail, Impact M4, how tall rings for EO Titan 5-25x56?
- Thread starter Itsme Nobody
- Start date
You can try the quarter stacking trick.
Stack the quarters and gently hold the scope on the stacks. When you get to the height you like, put the stack on the table and measure the height.
Stack the quarters and gently hold the scope on the stacks. When you get to the height you like, put the stack on the table and measure the height.
Upvote 0
Im thinking about buying the rail, and wondering how tall rings I would need.. So I dont have the rail.
Upvote 0
I have a Saber Tactical rail on my 30 cal M3. It does a nice job at protecting the shroud and is a nice piece of CNC work.
I already had 3 scopes, each with 50 mm objectives and extra Vortex rings of various heights so I mounted the rail and used the quarter stack trick to chose the rings.
I have since mounted an MTC Prismatic and did not add the old scope and rings to the rifles spread sheet.
So I apologize for no longer having the information you requested.
Upvote 0
Then it is still easy to use @Troy Bakel idea. That rail is a flat top no drop… so you can just measure on a table. I use a stack of paper instead of coins, but anything that is small and can lift the scope works.
My flattop rails, for 34mm and 56mm bell with caps, I use 1.375” at least.
Upvote 0