safety edgun r5m

[jonhabri]

Hello my name is Jonhattan from Uruguay and i have an edgun r5m 6.35 long.
I have the problem with the safety of the rifle, it is really hard and impossible to place, I already tried with the adjustment of the trigger and I continue with the same problem.
Any recommendation
regards

 

[Peskådot671]

Grab both of the safety levers from the top of the receiver with one hand and pull up.

 

[jonhabri]

I have already tried but it is really hard and impossible, I tried with my friend's r5m and in this way it can happen, but with my rifle there is no way

 

[Centercut]

A lot of the R5s are like that. Both my R5M Long and R5 SM have safeties that are either way too hard or impossible to put to safe with one hand. I’m not sure if the safety is adjustable or not? Maybe an EDGun fanboy will step to the plate with an answer and adjustment procedure. 

 

[jonhabri]

In my case it is almost impossible to place it with both hands, and when I managed to place it when I released the safety, the rifle was fired by myself. In the case of my friend, his R5 can be placed with 2 or 1 hand

 

[davidsng]

My Lelya was like that. I pulled up as hard as I could, it then engaged. Did it another 100x and it now worked perfect.

 

[Peskådot671]

A lot of the R5s are like that. Both my R5M Long and R5 SM have safeties that are either way too hard or impossible to put to safe with one hand. I’m not sure if the safety is adjustable or not? Maybe an EDGun fanboy will step to the plate with an answer and adjustment procedure.

Lol. Calm down Mike. We all know that EDguns are not perfect to include a lot of other brands.

 

[lbc_PSI]

Hello my name is Jonhattan from Uruguay and i have an edgun r5m 6.35 long.
I have the problem with the safety of the rifle, it is really hard and impossible to place, I already tried with the adjustment of the trigger and I continue with the same problem.
Any recommendation
regards

This is a dumb question..but is the rifle cocked when you attempt to put the safety on?

The user manual implies the gun must be cocked prior to putting the gun on "safe".

 

[jonhabri]

If the rifle is loaded when trying to put the safety, when it is not loaded the safety easily passes with one hand

 

[Centercut]

A lot of the R5s are like that. Both my R5M Long and R5 SM have safeties that are either way too hard or impossible to put to safe with one hand. I’m not sure if the safety is adjustable or not? Maybe an EDGun fanboy will step to the plate with an answer and adjustment procedure.

Lol. Calm down Mike. We all know that EDguns are not perfect to include a lot of other brands.

My bad. I expected to get jumped on for criticizing EDgun again (even though I have 3)…

@jonhabri When its not loaded the safety can easily be engaged, but then you can't cock the gun... Needs to be done after the gun is cocked.

 

[Peskådot671]

A lot of the R5s are like that. Both my R5M Long and R5 SM have safeties that are either way too hard or impossible to put to safe with one hand. I’m not sure if the safety is adjustable or not? Maybe an EDGun fanboy will step to the plate with an answer and adjustment procedure.

Lol. Calm down Mike. We all know that EDguns are not perfect to include a lot of other brands.

My bad. I expected to get jumped on for criticizing EDgun again (even though I have 3)…

 

[stormy]

You may need to file the hammer down a little as there is no adjustment envisioned by Ed.

 

[Drew]

I know I’m late to the party, but yes my leyla’s safety is hard to engage when loaded. At first I was just pushing on one side. Pretty soon, I had to tighten the Allen screw holding the safety on. I retightend and now use both sides of the safety to engage. I don’t need to use both sides anymore, it is habit, but just like my trigger and cocking bolt, the safety gets easier with use.