I'm a newbie. Bought an SCBA tank and a stikboy fill system (which ends with a female foster fitting to fill my new/used marauder). Scuba/paintball/firehouse/nitrogen alternatives don't look like they will work so after much reading here will bite the 'bullet' (if I can afford any afterward) and get the daystate 110. This will come with a din300 fill hose. Do I just need to purchase a din300 to male foster adapter (PA has a AV-00044M [PY-A-5358] that looks like it might work for $40) to attach to my tank fill hose?
My hope is to get the compressor and start using it and then dip my toe into all of those mods that Humdinger and Centercut have laid out. I assume operating without the additional air filter for a month or so is not 'ruining' anything (Montana, pretty dry air). If any usage without a secondary water filter is a bad idea, I would probably need to spring for the turnkey/high priced filter if I really want to get going.
Any thoughts appreciated.
My hope is to get the compressor and start using it and then dip my toe into all of those mods that Humdinger and Centercut have laid out. I assume operating without the additional air filter for a month or so is not 'ruining' anything (Montana, pretty dry air). If any usage without a secondary water filter is a bad idea, I would probably need to spring for the turnkey/high priced filter if I really want to get going.
Any thoughts appreciated.