Hello every one and i hope you are all keeping as well as can be expected during the current climate.
So i have a question to which the answer may be of help to me, i have fitted a lovely Primary Arms 4x16x44 mil dot to my Uragan .25 after clicking both turrets to center firstly and setting to 10x .
Zero was very low so i adjusted the rear elevation on the Eagle Vision mounts that i wisely purchased to accompany the scope and obtained zero respectfully.
Now my question is.... as i have a different scope height at the front as apposed to the rear then which measurement would i take to work out my trajectory,
Many thanks
So i have a question to which the answer may be of help to me, i have fitted a lovely Primary Arms 4x16x44 mil dot to my Uragan .25 after clicking both turrets to center firstly and setting to 10x .
Zero was very low so i adjusted the rear elevation on the Eagle Vision mounts that i wisely purchased to accompany the scope and obtained zero respectfully.
Now my question is.... as i have a different scope height at the front as apposed to the rear then which measurement would i take to work out my trajectory,
Many thanks