Scope mounting options
- Thread starter gunnerf250
- Start date
So I have a Hatsan jet 2 and I want to mount a leapers accu shot swat compact scope to it. In must be something that can fit of 2.8 inches of rail.... any ideas?
Upvote 0
High rings. One in front of magazine chamber, one behind. It's gotta be high enough to clear magazine.
Upvote 0
I found a cheapo dove tail to pic rail adapter and I'm going to give that a try since the scope came with rings
Upvote 0
On my jet2 the rear rail and the front rail were out of alignment by about 1/16". I was able to stack a crazy number of pop can shims on top of each other to compensate, but from what I've read it's a fairly common problem. It appears that you intend on mounting yours further to the rear than mine, so it may not be an issue for you.
Upvote 0
it actually was an issue for me it was off vertically so that's why I'm going with only mounting it to the rear rail
Upvote 0
This is how I have mine mounted. It would be significantly better if it were 1.5” or so further to the rear. You can see a few of the shims peeking out of the ring.
Upvote 0