Scott Tanks

[TempleDan]

One question and one comment.
First off I bought a Scott tank from a local fire training company and was wondering if they have the standard size port to fit a standard fill station? It’s considered a 45 minute tank.
The comment, they have almost 100 tanks they are selling off for $85 each regardless of size, 30 minute and 45’s if anyone is interested.

 

[grackleblast]

OK , you need a fill set up like this or one like it . More info please. How old are the tanks , and what condition ? Could be a good deal or ; so - so depending on their condition.

 

[6gun]

Ive got one too, out of date 77cf I think. The Amazon chinesium fill station fit but the probe seal that fit into the taper leaked on 3 units for 3 guys. So i just put legit ends on the fill station and have no problems now.

My 88cf luxfer I just put a Saber fill station on

 

[Gerry52]

Most SCBA'S use a CGA347 fill adapter, about $50 on Ebay. Look for one that's hand tightening (like the picture above). They've served me well for 8 years.
If you could show a pic of the tank valve & threads it would help (but it probably a CGA347).

CGA347 Air Fill Station Kit PCP SCBA Charging Refill Adapter with Hose HPA | eBay

Interface Type:CGA347 firefighting connection,work in US,KOR and CL and so on. 1 x Refill Charging Adaptor. HPA Fill Station Charging Adaptor with G5/8 Din 300 Bar Connector for Scuba Tank. 60cm Microbore Hose.

www.ebay.com

 

[357cal]

Most SCBA'S use a CGA347 fill adapter, about $50 on Ebay. Look for one that's hand tightening (like the picture above). They've served me well for 8 years.
If you could show a pic of the tank valve & threads it would help (but it probably a CGA347).

I have a MSA CF tank and your right most do use the CGA347. https://a.co/d/6393Ref I have been using this same one for 3 years.