Airgun Technologies sekhmet 28mm digital pressure gauge AGT Uragan 2

[TX-Shooter]

Hi guys,

Do you know if I can install a Sekhmet 28mm digital gauge Gen 2, on a Uragan 2 rifle?

I know they use the same thread, but with the bigger diameter of the Sekhmet gauge, will it work on a Uragan 2??

Both Uragan 2 action sides, are not completely flat, so I don't know if I can install a Sekhmet and make it work.

Looking forward to hear your advice,

Thanks and best regards,

Alex

 

[WorriedMan]

My U2's 20mm gauge sits in a recessed area, almost touching the thicker edge above, don't see how any larger gauge fits. Maybe an adapter that moves gauge farther from receiver would work. WM

 

[Tricky-Dicky]

You could always fit one of these.

【Outgun】Side-mount Adapter Angled Pressure Gauge Bracket for FX BRK SKOUT AirForce airguns

Key Features： Outgun angled side-mount adapter allows you to easily reposition your pressure gauge from the side to the front of your air rifle, providing convenient access to pressure readings at all times. Compatible with a wide range of airgun brands. Universal fit for both 1/8NPT and 1/8BSPP...

www.sekhmetonline.com

SEKHMET Best PCP Digital Pressure Gauge

Minimum High-Pressure Digital Gauge with Algorithm

www.sekhmetonline.com

 

[TX-Shooter]

Thanks guys! ..I will try the Outgun side-mount adapter.
Regards!
Alex

 

[Strelac]

Thanks guys! ..I will try the Outgun side-mount adapter.
Regards!
Alex

Have you manage to install Sekhmet gauge?
I’m thinking about doing the same but I’m afraid if the gauge would bother me because I’m a left handed shooter.
25mm version s smaller but then again- it’s not so advanced as 28mm version

 

[MACTEN]

Have you manage to install Sekhmet gauge?
I’m thinking about doing the same but I’m afraid if the gauge would bother me because I’m a left handed shooter.
25mm version s smaller but then again- it’s not so advanced as 28mm version

Mine has one installed. It's the 25mm Outgun version with adapter. You won't be able to attach anything without adding a bit of distance from the block.

 

[Strelac]

Mine has one installed. It's the 25mm Outgun version with adapter. You won't be able to attach anything without adding a bit of distance from the block.

View attachment 552165

View attachment 552166

That looks great, thank you @MACTEN
As for distance between the block and the Outgun side mount, if I understood correctly; you had to putt something in between them, so you can screw the side mount into the block? I can’t see it from the images, can you please explain me that part?
Thank you one more time, I really appreciate your help and I can’t stress enough the importance of this group for all of us lonely wolves

 

[MACTEN]

That looks great, thank you @MACTEN
As for distance between the block and the Outgun side mount, if I understood correctly; you had to putt something in between them, so you can screw the side mount into the block? I can’t see it from the images, can you please explain me that part?
Thank you one more time, I really appreciate your help and I can’t stress enough the importance of this group for all of us lonely wolves

The outgun adapter is all that's needed. I meant if you try to just screw a gauge onto the side, it's a bit tight. A bonded washer helps but it's still tight. The outgun side adapter solves this as the part that screws into the gun is narrow and adds the length you need.

 

[Rich_B]

Now, if someone could figure out how to get a reg gauge on them, that would be really cool.

 

[Strelac]

The outgun adapter is all that's needed. I meant if you try to just screw a gauge onto the side, it's a bit tight. A bonded washer helps but it's still tight. The outgun side adapter solves this as the part that screws into the gun is narrow and adds the length you need.

Thanks @MACTEN for your explanation, I wasn’t sure about that part so I better ask.

I have one more thing to deal with, but it seems that can be solved by screwing the side mount in bit more and turning the gauge approx 30° clockwise; I have an aftermarket handle that is longer than OEM part. Or I can always replace that or even make it shorter.

Thank you for your help,
ATB
S.