SEKHMET Digital Pro Gen 2 shot count doubles

[msg1979]

Just installed 2x Pro Gen2 on a panthera 700 1.77

The reg gauge is set to regulator mode and the res gauge to reservoir mode.

The shot count on the regulator gauge is spot on - but the gauge to the reservoir it doubles the shot count which means the remaining shots, air usage per shot and average air usage is wrong.


Is there any solution to this?

 

[Revoman]

Search for Sekhmet gauge issues here and look for Nicole's answers. Nicole is the new person to contact for Sekhmet issues and seems to have a great grasp of the history and how to mitigate any issues.

mike

 

[msg1979]

Here is the answer from sekhmet


"After reviewing, they have informed me that due to the design of the Panthera, especially for the .177 caliber which is a smaller bore size, the air tank refills the regulator at a particularly slow rate. This results in the air tank pressure gauge showing very gradual changes in pressure, with the pressure dropping almost imperceptibly by one bar at a time. Consequently, our digital gauge calculates multiple shots when in fact only a few have been fired, leading to incorrect shot counts."

Well....
They are going back. I bought them to use the pro features - remaining shots, air usage per shot, average air usage

I hope they would state this with their product. If I knew I hadnt spent 2 x 99 euro

 

[Revoman]

Wow....that bites. They absolutely SHOULD include that information in the description, otherwise it's pretty deceptive in my opinion.

mike