Tuning Sekhmet won't work on the Air Venturi Avenger

Jump to latest Follow Reply
SkeeterHawk

SkeeterHawk

Member
Oct 23, 2021
684
622
Florissant, Colorado, United States
Hello again, Everyone.

I have been making modifications to my Avenger and was curious if I could equip it with Sekhmet digital gauges. The last time I had it apart I pulled a gauge off so that I could check the thread. It turns out that it is an M8x1, which is not in the list of available threads for the gauges. They only offer

  • M10x1
  • 1/8 BSPP
  • 1/8 NPT

If you don't mind your gun looking "ghetto", you could use an adapter similar to this one on Amazon. I would use a hydraulic fitting, personally, which would be even heftier.

Anyway, I just thought I'd let everyone know.
 
thats the thread of diana bandit/stormrider to, and apparently some airforce guns as i found some black faced gauges in psi branded airforce that fit ...
Click to expand...

Exactly! The PCP conversion kit for my Crosman 2240's uses the same thread. I ordered some of these for those guns, and they actually come branded with the AirForce logo. You hit the nail on the head! This was the actual gauge that I threaded into the Avenger to test it out.

I'm glad that you pointed that out Dizzums. That gives me a little more confidence that Sekhmet may end up supporting that thread since it is used not just on the Avenger...and some obscure 2240 conversion kit.

Cheers!
 
Upvote 0
SkeeterHawk said:
Hello again, Everyone.

I have been making modifications to my Avenger and was curious if I could equip it with Sekhmet digital gauges. The last time I had it apart I pulled a gauge off so that I could check the thread. It turns out that it is an M8x1, which is not in the list of available threads for the gauges. They only offer

  • M10x1
  • 1/8 BSPP
  • 1/8 NPT

If you don't mind your gun looking "ghetto", you could use an adapter similar to this one on Amazon. I would use a hydraulic fitting, personally, which would be even heftier.

Anyway, I just thought I'd let everyone know.
Click to expand...
 
Upvote 0
I really like the m8x1 from a builders standpoint. It wastes less meat in high stress areas and is easy to get to seal with an oring at the bottom. I wish it was more common. I even make my qd fill ports using this thread.

Fwiw, I have a brass China digital that I rethreaded from m10 to m8. Worked fine. I haven’t rethreaded any of my sekhmets.

Dave
 
Upvote 0
SkeeterHawk said:
I agree. I have a number of guns with this thread for the gauge, and it works fine. This said, I have a number of these adapter fittings on the way that will be here soon that change it to 1/8" NPT. I'm hoping that Sekhmet will come around and start supporting this thread 🤞
Click to expand...
You're okay with the gauge sticking out that far?
 
Upvote 0
LONESTAR .25 said:
Question is has anybody tried one? Strange we have not gotten any word on them
Click to expand...

Screenshot_20231125_102424_Gmail.jpg
 
Upvote 0
  • Like
Reactions: LONESTAR .25
Upvote 0
  • Wow
Reactions: SkeeterHawk
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu