I have a seneca aspen 22 cal that won't pump. Will not show any psi after 100 pumps. Anyone have a video of how to repair gun or where I can send it. Pyramyd Air, where I bought it won't help. Thank You
Tuning seneca aspen
- Thread starter jimbo1947
- Start date
Is it leaking or just not pumping up? Check this thread out, it might lead to how to fix it.
https://www.airgunnation.com/topic/stuck-halfway-thru-seneca-aspen-nova-freedom-pump-repair-photos/
https://www.airgunnation.com/topic/stuck-halfway-thru-seneca-aspen-nova-freedom-pump-repair-photos/
Upvote 0
You can still use the gun even if the pump is not working properly by using the included fill probe and filling it via fill port located under the pump handle with a hand pump or tank.
Upvote 0
Hope you followed proper periodic necessary lubing instructions and used the included small bottle of lube. If not then hopefully lubing it and working it in may help.
Upvote 0
Upvote 0
Thank You Odoyle. I have oiled it with silicone it pumps ok just won't pump up. I'll try your suggestions and links.
Upvote 0
I am considering purchasing a Seneca Aspen. But your post about Pyramyd Air was concerning. Why wouldn't they help?
Oscar
Oscar
Upvote 0