I just pickd up a f8 from my buddy.but I need a compresser.it says it needs 125 psi oitput.can I use a 100 psi output alex
Shoebox questions
- Thread starter alex2865
- Start date
Aloha Alex,
yes 100psi will work just fine, I have my shop compressor feeding a water separator and regulator which the regulator is set to 100 psi for my shop tools. I just use another water/desiccated filter inline just before my shoebox f10.
Aloha,
Keone
yes 100psi will work just fine, I have my shop compressor feeding a water separator and regulator which the regulator is set to 100 psi for my shop tools. I just use another water/desiccated filter inline just before my shoebox f10.
Aloha,
Keone
Upvote 0
I run my F8 at about 85psi. I do use a higher 125psi on my F10. The F8 has been working fine for the last few years.
Upvote 0