Shooting Through a Spinning Washer Challenge - Super Hard!! UPDATE!! Success!! I got two on video!!

Jump to latest Follow Reply
SkeeterHawk

SkeeterHawk

Member
Oct 23, 2021
684
621
Florissant, Colorado, United States
This has got to be one of the most difficult shooting challenges that I have ever tried. Credit for the idea goes to @bucketboy for this post within his original post on "Sweetener". I just "turned it up to 11".

Here is my video showing the challenge and how it is done:

For this challenge, I was shooting at a 3/8" flat steel washer. The actual physical dimensions of the washers I was using is 0.44" I.D., with a 1.01" O.D. I was shooting this with a 22cal shooting just under 40FPE at 25 yards. We had sustained wind of about 11MPH, and it was shifting all over the place. You can see the wind flag from the camera that was behind me while I was shooting. It was flip-flopping all over the place.

I think I'd like to try this again with more washers (in case I do as bad as I did in this take), and wait for a little less or at least more consistent wind. I am also thinking that I'd rather use fishing line or something more resilient next time too, but I wonder if it would be pliable enough to allow the washers to spin freely. Polyester or Nylon thread, perhaps? If you have knowledge here, that would be appreciated! 👍

Anyway, I did my best, but tanked. What are your thoughts on this challenge? Can you do better? Let's see!!!
 
Last edited:
  • Like
  • Haha
Reactions: Sqwirl57, bucketboy and Swildman
SkeeterHawk said:
This has got to be one of the most difficult shooting challenges that I have ever tried. Credit for the idea goes to @bucketboy for this post within his original post on "Sweetener". I just "turned it up to 11".

Here is my video showing the challenge and how it is done:

For this challenge, I was shooting at a 3/8" flat steel washer. The actual physical dimensions of the washers I was using is 0.44" I.D., with a 1.01" O.D. I was shooting this with a 22cal shooting just under 40FPE at 25 yards. We had sustained wind of about 11MPH, and it was shifting all over the place. You can see the wind flag from the camera that was behind me while I was shooting. It was flip-flopping all over the place.

I think I'd like to try this again with more washers (in case I do as bad as I did in this take), and wait for a little less or at least more consistent wind. I am also thinking that I'd rather use fishing line or something more resilient next time too, but I wonder if it would be pliable enough to allow the washers to spin freely. Polyester or Nylon thread, perhaps? If you have knowledge here, that would be appreciated! 👍

Anyway, I did my best, but tanked. What are your thoughts on this challenge? Can you do better? Let's see!!!
Click to expand...
Ha ha, as though glueing a washer to he board and shooting through the whole wasn’t difficult enough you decided to hang them from a thread, in the wind where they could not only swing but rotate also🤪🤪🤪

Bonkers😁😁😁

Bb
 
  • Like
  • Haha
Reactions: markhooper and SkeeterHawk
Upvote 0
As @poncho83 said, this challenge is QUITE fun!! I tried it again, and I actually nailed two this time!! Woo Hoo!! Here are the results you can witness for yourself:

Here is a close-up of one of the successful shots:
20240417_104118.jpg


Here is the other one:
20240417_104158.jpg


You can see the crazy conditions I was shooting in, in the video...and I STILL managed to pass through two of them!! I am super-happy with these results! Let me know what you think!
 
  • Like
Reactions: rc4fun
Upvote 0
I watched this video again and I am pretty sure that I shot through washer #2 as well, but my dumb a$s took another shot at it to screw me up.

I'd like to try this challenge again, but I would recommend 10 washers, and 10 shots. If you miss, or pass through it, you will have to determine that after you get done shooting. Just move on. As you can see, the washers are swinging around quite a bit in higher wind, so you will have to try to be as honest as possible.
 
Upvote 0
bucketboy said:
Ha ha, as though glueing a washer to he board and shooting through the whole wasn’t difficult enough you decided to hang them from a thread, in the wind where they could not only swing but rotate also🤪🤪🤪

Bonkers😁😁😁

Bb
Click to expand...
It was also smart to paint the sides different to judge the spin. Shoot is there anything smaller than .177? Nice challenge.
 
  • Like
Reactions: SkeeterHawk
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu