Should I get a cs4 if all I'm filling is an umarex origin 22 ?

[HamburgerTime]

I'm looking to get a compressor for my pcp rifle and I was previously trying to decide between a yong heng and a cs3 until I just say the cs4 available. Right now I only have the umarex origin 22 with no plans to get anything else but who knows what the future holds. I don't do extensive shooting with mine but that may change if I can easily fill it. I kind of decided against the yong heng as i don't have the space to set it up and leave it and I would get tired of storing and setting it up each time so that turned me to the cs3 vs cs4. The cs4 is nearly double the cost (current discount+promotions) but it appears to be a much more impressive compressor that I can't see ever outgrowing however the cs3 may do just as well for me just for filling up a single rifle.

What do you more experienced people think about this, should I just go for the cs4 or will the cs3 do me just fine?

 

[WorriedMan]

Hamburger,
In your case I'd suggest the CS3, will easily handle the Umarex, and more, should you follow the path most of us have and add to your collection. If Yong Heng isn't practical and sticker shock with the CS4, CS3 seems the way to go. WM

 

[FLgunner]

I agree, in fact, you would probably be fine with the CS2 and save some money! The CS2 is on sale at GX Pubs and you can get an extra 10% off with discount code: 10OFFGX

GX CS2 Portable PCP Air Compressor for Air Gun Inflatable Rifle Hunting, GX PUMP CS2 Portable PCP Air Compressor, 4500Psi/30Mpa,Oil-Free,Powered by Car 12V DC or Home 110V AC with Adapter (Included), Paintball/Scuba Tank Compressor Pump with Extra Mo

GXPUMP CS2 Portable Airgun Compressor, 4500Psi/30Mpa,Oil-Free,Powered by Car 12V DC or Home 110V AC with Adapter (Included), Paintball/Scuba Tank Compressor Pump with Extra Moisture-Oil Separator. Only Available in USA and Europe We ship CS2 from USA Oil-Free & Water-Free & Built-In Fan...

gxpumpofficial.com

 

[Ranchibi]

If you can afford it, the CS4 is a better unit and if you get more airguns with a bottle or a tank......

 

[Trucker3573]

I would go with the cs2. The cs3 has a rep for bad circuit boards, doesn’t fill any faster than the cs2 and has some extra non essential features. I would save some coin and get the 2

 

[BanjomanMI76]

Unless you are going to fill a tank, as FLgunner and Trucker3573 have stated a CS2 will fill your needs.
I have a Benjamin Discovery and a Marauder and filling both at the range takes about 5 minutes off the car battery (running).

 

[DesertSilver]

I personally would get the cs4 if I can afford it. You will in all likely hood get more PCPs and grow tired of hooking the cs2/3 to fill your rifles and want to get a tank.

 

[HamburgerTime]

Thanks for the help everyone. I decided to just go ahead and get the cs4.

Reading different threads some say get an external moisture filter and some say its not needed. Should I get one and if so what a good low cost option for just filling guns, if i every start filling tanks ill look into a larger/better filter setup.

Also can someone reccommend me a specific coolant, most i find are not ph neutral?

 

[elwoodblues]

Coolant use distilled water and a little water wetter , as for moisture this does do a good job removing water but I only feed mine low pressure Nitrogen so no water ,C02 and NO DETONATION in pumps or guns