Should I trade my brocock concept s6 for a hatsan bullboss

They are still stuck because I can't find anything to get them out with.


Try a brass rod or wood dowel slightly smaller than the bore size and carefully push the pellets out from the muzzle end back through the breech. If the magazines stuck you may need to disassemble. You may be able to sheer the pellet if it is stuck between the magazine and breech. I don’t own a Brocock so some one that does needs to chime in with specific things to check and do. I’m sure it can be fixed and it is a much better rifle than the Hatsan.
 
I cycled a second pellet in my Contour S6 a couple times. Remove the magazine if you can. You may have to carefully pull it out and shear off a pellet, but it should come out. If you can't pull the mag out, disassemble the mechanism on the left side of the breech and you can push it out. Next remove the moderator and use a wood dowel to push the pellets back through the breech. Taper the dowel so it only contacts the pellet and not the o-ring.

1589401962_25375535ebc596a861ea4.03538923.JPG










Here is a where you can buy extra o-rings and such.

https://spares.bagnallandkirkwood.co.uk/product/brocock-super-6-models-replacement-magazine-indexing-claw/