Shrinking Circles - Shooting Challenge!!

[Michael]

Download & print on standard 8.5x11'' paper

Challenge: How many shots will it take you to hit all 6 targets?

Distance: Any

Position: Any

Airgun Type: Any

Caliber: Any

Requirements: Download the target, print it out, and start shooting! Take a picture (or video) of the results and upload it below.

Prizes: Select entries "may" be sent random prizes

 

[Michael]

Albeit a bit windy, the weather was gorgeous here in Texas and I got 'er done!

 

[Ezana4CE]

@Michael Nicely done. Nailed the smallest dot on that last shot. 

 

[douger]

https://youtu.be/UgH2BIMehZ46 shot -25 degrees out made this one real fast ill say 6 shots 

 

[bigmixx2]

https://youtu.be/m64ImVirlZA

 

[Hajimoto]

Albeit a bit windy, the weather was gorgeous here in Texas and I got 'er done!

Very nice Michael..... As soon as this 2°F breaks I will attempt

 

[Hajimoto]

Nice shootage 
@douger
@bigmixx2

@bigmixx2 got me looking punk like not getting out in the cold and doing mine LOL

 

[Michael]

https://youtu.be/m64ImVirlZA

As always nice job Bigmixx2! The smallest target can be difficult to hit, especially while standing!

 

[Carmellathomas]

I'm interesting to participate in this challenge. 




cobra kai jacket

 

[Smashby59]

35 yds kral puncher breaker. Little bit windy today. 

 

[M0ist0ne]

Lol shot the video two weeks ago and forgot to upload and post it!

Was from two weeks back, was -8 outside (hence the heat miraging). I slid the basement door open just long enough to setup my DeathGrip tripod and complete the challenge.



https://youtu.be/5vs31ihLgl4





Impact Mk2 in .22 with Daystate Howlers slugs speeding along at 970-980fps.

 

[Popeye.Tom]

Hi all,

Actually first post here! I know it's not really Feb anymore, but saw this and had to go try it. Hope I have privilege to upload the pics! This is a .25 and the pellets are the 33.95gr Exact King Heavy, MKII.

I'm new to PCP and have an AT44 that I bought used off ebay. Not new to airguns, everything else that I have are springers. I've only done a trigger job and ported the valve (aligned to transfer port and filled the other holes.) Next step will be to polish the barrel.

I'll have to try this again w/ the RWS Model 48, .22 w/ Macari spring. Sure that will take way more shots!

Cheers,

Tom

 

[Michael]

Seems that the cold weather prevented quite a few people from participating But that didn't stop Andrew @M0ist0ne from pulling it off in -8 degrees!!!

Neat video of the heat mirage and pics too!

Congratulations Andrew, I'll send you a DM.

-Michael