sig sauer sierra3 BDX for PCP Airguns

[lightguide]

Are this optics suitable for PCP airguns?

 

[JadedC]

Well you can put anything on a pcp. You only have to worry when putting a non springer rated optic on a spring gun. Spring powered guns have recoil that goes in both directions when fired (first forward as the spring uncoils, then backwards as it pushes the pellet out). The only thing you want to look for is a scope with adjustable parallax. If a scope doesn’t have adjustable parallax it will either be set at 50 or 100. Distances when shooting pcps can vary drastically, so you want a scope that is able to focus as close as possible. Of course if you only plan on punching paper at a set distance such as 50 or 100 yards then a nonadjustable scope like the one you mentioned is fine. So basically yes you can use the scope, but it’s not the most ideal.

 

[Odoyle]

I believe Golden State Airgunner here has one on his Springer (FWB 124).

 

[Glenroiland]

I believe Golden State Airgunner here has one on his Springer (FWB 124).

I think he has the whiskey 3asp scope on that gun. 

 

[Odoyle]

TY4 the clarification!

 

[lightguide]

Ok, Thanks Everyone. That is what I needed to know. Appreciated!