Can this mount be adjusted up or down, account of my Leishiy shoots to high for regular adjustment. Run out of Y at 300 to get up to my poi in my pard 008, and the poi is still a bit high.
Upvote 0
Sighting in a Pard NV008s LRF on an Evol .30
- Thread starter Ezana4CE
- Start date
up cant or down ? will the eagle Vision go both ways, I would have to shim up more the I want. lol .0039 "
Upvote 0
I believe that the Eagle Vision mounts move horizontally and vertically. I suggest checking their site for small details. They have a few adjustable mounts. I ’ve only shimmed the Pard factory mount for vertical adjustment.
Upvote 0
That rear mount where it interferes with the magazine; remove about 20 to 25 thousandths of an inch across the front of the "foot". Just enough relief to allow the magazine free movement. That should be 0.020” or so not thousands. If you need help a machinist or gunsmith can help at great expense. Be Well Brothers, Bandito.
Upvote 0
@B_y_r_o_n I just noticed what you did here. Your mount is similar to my mount except it appears to be shorter and has a single point to mount the base to the guns rail. Also you flipped it around so that the windage adjustment screw faces you. It also appears that your Pard mounts directly to this mount. How does that work? Are any additional pieces needed? Thanks for sharing. I was very slow to catch this.
Upvote 0
I believe the only difference between your mount and mine is that mine has a one piece attachment to the rifle. I flipped mine to get the desired eye relief. Pard attaches using two screws up through the top rail. There are multiple holes so can be mounted it different location if needed. No additional pieces required.
Last edited:
Upvote 0
@B_y_r_o_n Your rail appears to be shorter as well. I like what you did with it. I'm familiar with those screws. I figured it was that simple. Just thought I'd ask to be sure. Thank you.
Upvote 0
Thanks to all. Going with the adjustable Eagle Vision mount. My pard's on both my Crickets are almost spot on, Leshiy 1.5 foot high at 20 yds. Shim would be 39 or 40 thousands, too much and effected horizontal adjustment as well. Did not get my vertical down enough for my liking.
Upvote 0