Silencer for AGT Vixen
- Thread starter lsguinn
- Start date
I’m thinking that this DonnyFL adapter and a Ronin would be just right!
donnyfl.com
Uragan King 1/2 x 20 Adapter A79
Features: 6061 Aluminum 1/2 x 20 male threads Black Anodized Thread Protector compatible up to 30 caliber Will not work if your baffle looks like the one in the picture below.
donnyfl.com 
Upvote 0
Yeah, it is, but their is a lto of air blasting out of that barrel. I think the barrel is like 10 inches short, I meant long. ( on the short vixen) To get the energy, they pushed a lot of air out the muzzle.
Upvote 0
That’s odd because I’ve heard several people remark about how quiet the vixen is thanks to the huge shroud. Could you have a leak that’s causing excess noise?
Upvote 0
Silent Thunder Ordnance
We offer record breaking flashlights, clever EDC items, and custom slingshots. We also do R&D on just about anything you can imagine, from airguns to home decor.
www.silentthunderordnance.com Affordable! I will update after I try it!
Last edited:
Upvote 0
Yes, the Pugio helps quiet the barrel report(Uragan 2 barrel report is very quiet without Pugio though). The noise from the hammer/valve is = to the stock barrel report.
With Pugio, the hammer/valve sound is all I hear.
With Pugio, the hammer/valve sound is all I hear.
Upvote 0
I got a Pugio for my U2 .25. And although it does a great job quieting down the (fairly quiet to begin with) report, I’m getting terrible pellet and slug clipping from it. With just the shroud the gun is hole on hole.
Upvote 0
Hey Darylm, no Clipping on mine but is a .22 U2. Do you have the plastic or aluminum end cap? Either way, drill the end cap out a little if you can see that it’s clipping on the end cap.
Upvote 0
I have the aluminum cap. A .25 pellet/slug fits through the hole just fine, so I’m not sure why it’s clipping. But yes, I was going to drill it out a little wider to see if that’s corrects the issue.
Upvote 0
Carbon Fiber Shroud with 3D printed moderator for AGT Vixen
I was surprised that a little 0.177 Vixen short was louder than my Edgun 0.25 R5M long. So I tested some 3D printed moderators that were 2" longer that stuck out of shroud and screwed into the shroud and barrel. They were all quieter than OEM. So I decided to buy a CF tube and make a 2" longer...
www.airgunnation.com Upvote 0
I found that shooting on the open they seem quieter than in the woods as sound reflects of the trees.Carbon Fiber Shroud with 3D printed moderator for AGT Vixen
I was surprised that a little 0.177 Vixen short was louder than my Edgun 0.25 R5M long. So I tested some 3D printed moderators that were 2" longer that stuck out of shroud and screwed into the shroud and barrel. They were all quieter than OEM. So I decided to buy a CF tube and make a 2" longer...
Upvote 0
Please please tell me where you got that carbon Front grip at. I’ve been searching and haven’t come up with any suggestions !
Upvote 0