Does anyone make a single shot load tray for a RAW HM1000? I have done some searches but haven’t found anything definitive. Seems like they would be available.
Single shot load tray for a RAW HM1000
- Thread starter BrazosbyNemo
- Start date
Why? It’s pretty easy to load single shot — I do it all the time. That’s the best part of the chamber design.
Upvote 0
Upvote 0
I have some nerve damage in my hand and makes picking up pellets out of a tin tough. A loading tray would be good. Seems like someone would be making one, 3D printed or whatever.
Upvote 0
I made one out of a piece of decking material. Just a block with a notch for the pellet. Let me see if i can find it.
Upvote 0
RAW makes a donut shaped one and CARM makes a fold out style version. Just make sure to purchase the correct size loader for your breech as the older gen mag fed RAW's have a smaller breech.
Upvote 0
I have a single shot for the Raw, It looks like a little Pac-man that fits into the breech.
There really is no need for it. It does not help that much in loading the pellet
There really is no need for it. It does not help that much in loading the pellet
Upvote 0
I use the CARM SSL and it is really nice. If you order one make sure that you measure your gun's magazine width as depending on vintage, it may be a wide or a narrow (CARM sells both).
https://www.carm-magazines.com/ssl-for-theoben-raw-air-rifles.aspx
https://www.carm-magazines.com/ssl-for-theoben-raw-air-rifles.aspx
Upvote 0
I sold my RAW TM 1000 rifles in .177 because of the same problems you have. But mine was a TM so I’m unclear about the HM? Side note I can easily load my TM 1000 pistol in .20 because I can tilt the gun downward and the pellets are slightly bigger
Upvote 0
The HM is the model that uses the magazine so the loading breech is much more narrow than the single shot RAW rifles. There just isn’t enough room to get your figures in there to load a pellet.I sold my RAW TM 1000 rifles in .177 because of the same problems you have. But mine was a TM so I’m unclear about the HM? Side note I can easily load my TM 1000 pistol in .20 because I can tilt the gun downward and the pellets are slightly bigger
Upvote 0
I've got a RAW tm1000, I'd rate it excellent, and a couple of decent hft shooters who've had a go, agree.
It's accurate , and I've put some of my best hft scores in with it in the last 2 years.
It's accurate , and I've put some of my best hft scores in with it in the last 2 years.
Upvote 0
The OEM one from RAW works well. Have been using it for years. Carm makes a right hand and left hand loader. Be sure to specify when ordering. My right handed one ( second) didn't quite line up correctly so it clipped the pellets in the breach. It took a little messing with to get it to work. Still use the RAW SSL for competition.
Upvote 0