Skout Skout EVO First Impression

[DrPutz]

Lewis and others, thank you for the tuning suggestions - it is really helpful in getting my new Evo setup. Can anyone explain how the valving system works? Is the LP the equivalent of a hammer weight? What does the dwell do? I have my dwell set to 12 and it bumping it up really didn't seem to change my velocity (like on a RedWolf). I suspect that the dwell is only for the LP hammer, but not sure.

I was able to get one awesome group after replacing my fill port due to an issue. However, I was getting some flyers that I think are due to sharp edges on pellet probe. I polished the probe and will see how it performs tonight.

Thanks again,
Dan

 

[Chuck26287]

Love my EVO so far but have not been able to shoot it much. I have the same .22 LW barrel. I added the Tesla moderator to make it a little more backyard friendly.

50 yards 5-shots group with JSB 25.39 gr pellet. Regulator set at 1,300PSI. Chrono at 858fps.

View attachment 489151

View attachment 489152

Do you know what your low pressure reg was set at?

 

[manabeknives]

Do you know what your low pressure reg was set at?

early tunes kept it down to around 10% of the HPR
I have been having better results with the LPR at 12% ..so around 155 lrp for a 1300 hpr
Mike

 

[Aunsell]

Just want to ask all the pros out there. What bottle threads do the EVO guns use. I wanted to order a larger aftermarket bottle.
Thanks

 

[manabeknives]

Just want to ask all the pros out there. What bottle threads do the EVO guns use. I wanted to order a larger aftermarket bottle.
Thanks

it's a standard m18 thread