Skout Sniper Slug - Official Release

[DanT55]

I would rather say 3 milliseconds

The settings are programmed into the EPOCH screen and can be adjusted from 10-50 in increments of 1 in program mode. The valve and transfer port are very large relative to other PCP designs. It seems to work well with their valve and flow design. I believe the dwell in this case is how much LP air is let in over time thru the solenoid until the high pressure side over rides it to close the valve. I have also noticed that the LPR will follow the HPR up/down but can also be throttled down or up manually for specific tuning. My question would be if you have a higher LP setting should the dwell be decreased since you don't need as much due air, due to the higher pressure, to open the valve??

Lewis posted this picture below of the valve vs FX valve pin.

img_4732-jpg.339984

 

[manabeknives]

Are the .22 ..slug liner and slug..going to be the last ones to be marketed?
what will be the eta for the .22?
Mike

 

[Firewalker]

We have used them in FX as well, (slightly larger than Skouts .2475) and they shoot incredible. There is a video on AGN at 817 yds out of an M3.

About damn time we had a slug for .25 that would be accurate out of an FX liner!

 

[Centercut]

About damn time we had a slug for .25 that would be accurate out of an FX liner!

The .25 Altaros ATP Smooth 49.5 grain is as accurate or more so than any slug I've ever shot. I shoot them from an FX Superior Heavy 1:18 liner...

 

[Firewalker]

I understand that, but this cost more than many .22 PB ammo. Heck, slugs should be cheaper then pellets but there not cause we just accept that. Price it right and they will recover the cost by selling more quantities. I'm just not pulling the trigger on any of this for a quarter a shot. Hopefully the Zans will be promising...

This is my conundrum as well, I can get Ely Tenex for $.50 or a .25 slug for $.22 a round.

I get sub MOA all day with the apparation, can the Scout match it?

 

[Centercut]

This is my conundrum as well, I can get Ely Tenex for $.50 or a .25 slug for $.22 a round.

I get sub MOA all day with the apparation, can the Scout match it?

I think you meant $.18 a round for the Altaros...

 

[Skout-airguns]

Are the .22 ..slug liner and slug..going to be the last ones to be marketed?
what will be the eta for the .22?
Mike

They won't be last, we have barrels and slugs in the works. ETA is June for Slugs and Slug barrel.

 

[Firewalker]

I think you meant $.18 a round for the Altaros...

Only in bulk...

 

[Centercut]

Only in bulk...

Yep. Who buys one or two packs? Bulk is ten. Same deal for Skout Corbin

 

[Firewalker]

Yep. Who buys one or two packs? Bulk is ten. Same deal for Skout Corbin

I just posted small packs but the distance remains even, Tenex drops to $0.34 a round in bulk.

 

[CrashKT]

This is my conundrum as well, I can get Ely Tenex for $.50 or a .25 slug for $.22 a round.

I get sub MOA all day with the apparation, can the Scout match it?

Actually its $.11 per slug. Youre only getting 50 in tenex but a 100 from skout.

 

[Solo1]

Boy you guys like expensive ammo! I just bought 1000 rounds of cci std for $100 bucks!

 

[MartinTolsma]

Hello y’all,

Question from new Epoch gunner from The Netherlands. Are the standard liners which come with the riffle strong enough to use the .25 slug, or does Skout have a heavy liner for the slug? I can’t find specifics in the webshop..
Thanks and grtz from Holland

 

[Skout-airguns]

Hello y’all,

Question from new Epoch gunner from The Netherlands. Are the standard liners which come with the riffle strong enough to use the .25 slug, or does Skout have a heavy liner for the slug? I can’t find specifics in the webshop..
Thanks and grtz from Holland

Hi! Welcome to the skout family!

You will need to utilize the faster twist rate 1:23 slug barrel for the slugs. If you need assistance ordering feel free to email [email protected] and he can help you!

 

[MartinTolsma]

Since the start, our goal at Skout Airguns has been to pursue perfection. This goal has been driven by the feeling you get when your projectile lands exactly where you want it on the target. We have spent countless hours on this pursuit, testing countless projectiles to achieve this goal. This is when we determined if we wanted perfection, it would have to be created. With the help of our friends at Corbin Manufacturing, utilizing their years of experience in bullet and die-making, we came up with the perfect harmony between barrel and projectile. We have had many industry professionals and competitive shooters involved in testing to determine the perfect diameter and grain weight to achieve amazing results. This process eliminates the need to try many different grain weights and diameters of slugs. Our slug barrels are all checked at 100 yards in our indoor range utilizing the Skout Sniper Slugs before shipping to ensure customer satisfaction! All Rifle or barrel purchases include a free tin of slugs! For more information please visit https://www.skoutairguns.com/skout-slugs. More content regarding the slugs will be up in the coming days and more calibers will be released soon!
View attachment 451586

Hi! Welcome to the skout family!

You will need to utilize the faster twist rate 1:23 slug barrel for the slugs. If you need assistance ordering feel free to email [email protected] and he can help you!

Thanks for your fast reply,
grtz Martin