Brocock/BRK Sniper XR Magnum regulator adjustment

Jump to latest Follow Reply
Corvid_hunter said:
I have a Sniper XR Magnum inbound and was wondering if the regulator adjustment was on the front of the block by the tank and easy to adjust. I'm going to be shooting 18gr JSBs with it. I don't know what the different velocities are with the transfer port adjustment, but assume I'll need to tweak it a little bit.
Click to expand...
@Corvid_hunter After reviewing photos of the Sniper Magnum XR it appears to be built similar to the Sniper HR build. If it is the reg should be beneath the stock and under the manometers. It’s not tough to increase velocity, decreasing takes more precaution from what I recall. There are some reg removal photos in the first post of the following thread dealing with the Sniper HR .25 cal. Hope this helps some. I haven’t bothered my reg since I replaced it.

Tuning - Brocock Bantam Sniper HR Regulator Repair Attempt

**Caveat - I am not a pro, nor an airgun smith. I am simply an airgunner trying to learn to maintain and take better care of his airguns. If something proves too difficult I think it’s best to defer to professionals.** Tools used: I started by degassing my Bantam Sniper HR with the degassing...
www.airgunnation.com
 
  • Like
Reactions: L.Leon and Corvid_hunter
Upvote 0
Corvid_hunter said:
I have a Sniper XR Magnum inbound and was wondering if the regulator adjustment was on the front of the block by the tank and easy to adjust. I'm going to be shooting 18gr JSBs with it. I don't know what the different velocities are with the transfer port adjustment, but assume I'll need to tweak it a little bit.
Click to expand...
I don't need to mess with the regulator on my new Sniper XR (standard) at...all !!

I shoot a little slower speeds than most. I tried the settings just using the adjuster on mine.
I set it to one step down from the max. for the speed I wanted. I put a bunch of pellets (18.1) thought it. 4 fps variance. Perfect ! No need to mess with the regulator on mine anyway.

Mike
 
  • Like
Reactions: L.Leon
Upvote 0
MikeVV said:
I don't need to mess with the regulator on my new Sniper XR (standard) at...all !!

I shoot a little slower speeds than most. I tried the settings just using the adjuster on mine.
I set it to one step down from the max. for the speed I wanted. I put a bunch of pellets (18.1) thought it. 4 fps variance. Perfect ! No need to mess with the regulator on mine anyway.

Mike
Click to expand...
What type of velocity are you getting with the standard version?
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu