Snowpeak m25 7.62

[John1966]

Someone who knows what's going wrong, this is the first time I've tested my snowpeak m25 with the FX Chronograph. The figures seem very strange to me.
Notes
Bullet : 50.46 gr snowpeak

Weather: 6.9°C 2.7 m/s overcast clouds 986hPa/mbar 29.12inHg 96%

Shot count: 19
Low: 46.6
Hi: 89.9
Avg: 69.3
STD Dev: 15.3
Spread: 43.3

2024-02-10 14:03:13;88.9;FT Lbs;120.6;J;
2024-02-10 14:03:51;88.0;FT Lbs;119.3;J;
2024-02-10 14:04:24;85.7;FT Lbs;116.2;J;
2024-02-10 14:05:19;89.9;FT Lbs;121.8;J;
2024-02-10 14:06:16;88.5;FT Lbs;119.9;J;
2024-02-10 14:06:33;87.1;FT Lbs;118.1;J;
2024-02-10 14:07:37;52.8;FT Lbs;71.6;J;
2024-02-10 14:08:08;77.7;FT Lbs;105.4;J;
2024-02-10 14:09:04;74.7;FT Lbs;101.3;J;
2024-02-10 14:09:47;72.2;FT Lbs;97.9;J;
2024-02-10 14:10:15;69.3;FT Lbs;94.0;J;
2024-02-10 14:10:36;66.1;FT Lbs;89.6;J;
2024-02-10 14:10:51;65.3;FT Lbs;88.5;J;
2024-02-10 14:11:30;58.7;FT Lbs;79.6;J;
2024-02-10 14:11:45;56.1;FT Lbs;76.1;J;
2024-02-10 14:12:02;52.5;FT Lbs;71.2;J;
2024-02-10 14:12:18;50.4;FT Lbs;68.3;J;
2024-02-10 14:12:31;46.9;FT Lbs;63.7;J;
2024-02-10 14:12:50;46.6;FT Lbs;63.2;J;

 

[John1966]

Today finally put the Huma-air regulator in my snowpeak m25 7.62

Looks a lot better than before with the broken Chinese regulator.

This was the first test with the Huma-air regulator it still has to set itself.

Notes
Bull : 50.46 gr jsb

Weather: 7.9°C 1.8 m/s overcast clouds 1021hPa/mbar 30.15inHg 98%

Shot count: 10
Low: 870
Hi: 907
Avg: 891
STD Dev: 11
Spread: 37

2024-02-14 18:45:51; 900; FPS; 123.1; J;
2024-02-14 18:46:09; 884; FPS; 118.7; J;
2024-02-14 18:46:27; 870; FPS; 115.0; J;
2024-02-14 18:50:34; 893; FPS; 121.2; J;
2024-02-14 18:50:45; 891; FPS; 120.6; J;
2024-02-14 18:50:52; 893; FPS; 121.2; J;
2024-02-14 18:50:59; 895; FPS; 121.8; J;
2024-02-14 18:51:12; 898; FPS; 122.5; J;
2024-02-14 18:51:17; 907; FPS; 125.0; J;

 

[Florida_Man]

Looks good! The Huma regs I have used are super consistent, they just take a little bit of use to settle in.

 

[John1966]

Looks good! The Huma regs I have used are super consistent, they just take a little bit of use to settle in.

Thanks, indeed they have to settle first it was the same in my snowpeak p35

 

[ThomasSalin66]

Thanks, indeed they have to settle first it was the same in my snowpeak p35

Hi,
At what value did You set the regulator on your m25? I installed Huma regulator on my M25 7,62 at 140Bar but have not yet done any shooting so I don´t know what to expect..

///Thomas