Wood and metal.
Let me specify, WALNUT and metal.
Really not much of any plastic on this gun. Ergonomic stock, thumb up or through the thumbhole option. A few scuffs (one by the buttpad in above pics) but that's about the worst of of it.
I'm the original owner, purchased from AOA in April of 2017. I was told it was the last .177 they had. Leaked at first but it went back within a week and they resealed it. Hasn't had any leaks or other issues since then. So was resealed at the end of April of 2017.
Lothar Walther barrel.
30mm air tube. Shrouded barrel that ends in standard 1/2x20 moderator threads (no adaptor necessary).
200 BAR MWP
Manometer at the end of the air tube (face looks like a WIKA gauge but doesn't say "WIKA" on it)
I won some monthly field target matches in Hunter class with it back a few years ago, pretty accurate gun.
I've never been inside the airtube or breech block. The extent of my tinkering has been in adjustment of the hammer length, as it is adjustable. I mostly ran it around 18fpe but it'll go as high as 22fpe with OEM hammer spring and the hammer adjusted to as short as it'll go. I have no idea of more power is available with a heavier than OEM hammer spring, as I never saw the need.
Does pretty good with most pellets, and hunting accurate with NSA 12.5gr slugs (have popped pdogs out to 115 yards without any trouble).
Will include the following accessories:
Moderator, 5 magazines, end cap for shroud, fill probe, the two flat sides plastic "washers" that it came with as preload on the hammer spring (not necessary for sub 20fpe field target use), most of a box of Crosman Premier Heavies that shoot well in this gun after sorting (this particular box has some "winged" pellets that the worst of have to be culled out for best accuracy)
In fact, this is with some of those pellets from 30 yards and a bum bag this evening as a potential last hoorah I had with the gun. 6 shots per group (one magazine).
I considered using this as the basis for a rifle to pistol conversion for field target but that would entail cutting down that walnut stock, and I just couldn't bring myself to do so.
I don't shoot it much, so hoping somebody else can get some enjoyment out of it.
I've got the original box, but there's no padding or foam in it so it'll ship in a hard case inside of another box. If possible, I'll carefully flatten the original box and include it inside the outer box so the new owner has original box too.
$500, shipped, to lower 48 states only PayPal FF or if would rather send personal check, I'll need to wait for it to clear the bank before I ship.
(Lots of budget options in PCPs these days, none of them come with a Lothar barrel or walnut stock.)
PM if interested, willing to text and/or talk on the phone to answer questions, work out the details
Let me specify, WALNUT and metal.
Really not much of any plastic on this gun. Ergonomic stock, thumb up or through the thumbhole option. A few scuffs (one by the buttpad in above pics) but that's about the worst of of it.
I'm the original owner, purchased from AOA in April of 2017. I was told it was the last .177 they had. Leaked at first but it went back within a week and they resealed it. Hasn't had any leaks or other issues since then. So was resealed at the end of April of 2017.
Lothar Walther barrel.
30mm air tube. Shrouded barrel that ends in standard 1/2x20 moderator threads (no adaptor necessary).
200 BAR MWP
Manometer at the end of the air tube (face looks like a WIKA gauge but doesn't say "WIKA" on it)
I won some monthly field target matches in Hunter class with it back a few years ago, pretty accurate gun.
I've never been inside the airtube or breech block. The extent of my tinkering has been in adjustment of the hammer length, as it is adjustable. I mostly ran it around 18fpe but it'll go as high as 22fpe with OEM hammer spring and the hammer adjusted to as short as it'll go. I have no idea of more power is available with a heavier than OEM hammer spring, as I never saw the need.
Does pretty good with most pellets, and hunting accurate with NSA 12.5gr slugs (have popped pdogs out to 115 yards without any trouble).
Will include the following accessories:
Moderator, 5 magazines, end cap for shroud, fill probe, the two flat sides plastic "washers" that it came with as preload on the hammer spring (not necessary for sub 20fpe field target use), most of a box of Crosman Premier Heavies that shoot well in this gun after sorting (this particular box has some "winged" pellets that the worst of have to be culled out for best accuracy)
In fact, this is with some of those pellets from 30 yards and a bum bag this evening as a potential last hoorah I had with the gun. 6 shots per group (one magazine).
I considered using this as the basis for a rifle to pistol conversion for field target but that would entail cutting down that walnut stock, and I just couldn't bring myself to do so.
I don't shoot it much, so hoping somebody else can get some enjoyment out of it.
I've got the original box, but there's no padding or foam in it so it'll ship in a hard case inside of another box. If possible, I'll carefully flatten the original box and include it inside the outer box so the new owner has original box too.
$500, shipped, to lower 48 states only PayPal FF or if would rather send personal check, I'll need to wait for it to clear the bank before I ship.
(Lots of budget options in PCPs these days, none of them come with a Lothar barrel or walnut stock.)
PM if interested, willing to text and/or talk on the phone to answer questions, work out the details