Hello AGN:
I'm selling my trusty, beloved and ridiculously consistent/accurate Airgun Technology Generation 3 0.25 Vulcan Bullpup PCP w/ a very nice walnut stock and the following items:
You don't see many Vulcans for sale because everyone that owns one loves them and hangs on to them forever. This Vulcan and my previous Edgun Matador R3M are tied as my all-time favorite and most reliable airguns, ever. The Edgun was king for a long time until this Vulcan arrived and beat it out primarily due to better ergonomics (forward cocking mechanism and better designed magazines). The Edgun was sold about a year ago and, since then, this Vulcan has been my go-to gun whenever I need to take out any squirrels . . . it simply does not miss!
Besides the insane reliability and accuracy, here are a few other reasons you want to buy this particular Vulcan. It comes with one of the nicer walnut stocks you'll find on this model (Vulcan bullpup stocks are notorious for otherwise being pretty plain). There's some nice character to this stock that doesn't show as well in the photos as I'd hoped - rifle looks even better in person. I also installed rubber grommets on the main springs to dramatically reduce the ping that these rifles are known to have. The trigger's has been tuned to have a light but crisp break. The picatinny rail and sling stud were professionally installed. Plus, you'll get all the OEM & extra parts/accessories listed above.
Condition wise, this rifle has been extremely well cared for and is in mint, like new condition. There are no noticeable marks on either the action or stock. It holds air absolutely perfectly and has never had a leak of any sort. Rifle is supremely consistent and accurate and will easily do one hole groups between 30-50yds (which is the extent of my backyard range). I routinely kill squirrels out to 75yds without any problems. This Vulcan also holds my personal best 102yd one-shot, instant lights-out kill of a crow. The only "quirk" to this Vulcan is that the gauge seems to max out at 200bar - I typically fill to 230bar per my tank gauge but rifle gauge doesn't go above 200bar. This is a known thing with this model and AGT sent a replacement gauge to anyone that asked but it never bothered me enough to go through the trouble.
As with all my previous listings, the same disclaimers apply. I haven’t been as active on the forums but many of you know me. I have/had 13+ pages of all positive feedback on the old Yellow BOI as both a buyer and seller; I have a handful of references here and on the new Yellow BOI. I stand behind what I sell and am happy to answer as many questions in as much detail as you need if you’re a serious buyer. I’ve provided a crap ton of really clear, high resolution photos below because I want my buyers to know exactly what they’re buying – please take the time to review them.
Price is ABSOLUTELY FIRM at $OLD. For those that don’t know what firm means or conveniently choose to ignore that statement – it means I won’t take anything less than the stated asking price. I’m not in dire need of the money so I’m not desperate or in a rush to sell. Payment by Paypal Friends & Family is the preferred method. If you’re in the SF Bay Area, I’m happy to meet locally for the exchange so you can fully inspect the rifle and not have to pay any shipping.
https://imgur.com/Eesgarz
https://imgur.com/AlBojzh
https://imgur.com/kr5woIJ
https://imgur.com/Oj6t13E
https://imgur.com/7q5hFcF
https://imgur.com/PhPiCIC
https://imgur.com/as9QffM
https://imgur.com/GA8DNys
https://imgur.com/1n9cqzr
https://imgur.com/klfN5a3
https://imgur.com/W5RxJGb
I'm selling my trusty, beloved and ridiculously consistent/accurate Airgun Technology Generation 3 0.25 Vulcan Bullpup PCP w/ a very nice walnut stock and the following items:
- 3 magazines
- Single shot tray
- Fill probe
- OEM AGT fill assembly
- Owner's Manual & Factory Certificate
- Extra Replacement Delrin Striker
- Factory hard case
- 12 extra allen screws
- Magpul MOE picatinny rail, sling stud & rubber grommets installed
You don't see many Vulcans for sale because everyone that owns one loves them and hangs on to them forever. This Vulcan and my previous Edgun Matador R3M are tied as my all-time favorite and most reliable airguns, ever. The Edgun was king for a long time until this Vulcan arrived and beat it out primarily due to better ergonomics (forward cocking mechanism and better designed magazines). The Edgun was sold about a year ago and, since then, this Vulcan has been my go-to gun whenever I need to take out any squirrels . . . it simply does not miss!
Besides the insane reliability and accuracy, here are a few other reasons you want to buy this particular Vulcan. It comes with one of the nicer walnut stocks you'll find on this model (Vulcan bullpup stocks are notorious for otherwise being pretty plain). There's some nice character to this stock that doesn't show as well in the photos as I'd hoped - rifle looks even better in person. I also installed rubber grommets on the main springs to dramatically reduce the ping that these rifles are known to have. The trigger's has been tuned to have a light but crisp break. The picatinny rail and sling stud were professionally installed. Plus, you'll get all the OEM & extra parts/accessories listed above.
Condition wise, this rifle has been extremely well cared for and is in mint, like new condition. There are no noticeable marks on either the action or stock. It holds air absolutely perfectly and has never had a leak of any sort. Rifle is supremely consistent and accurate and will easily do one hole groups between 30-50yds (which is the extent of my backyard range). I routinely kill squirrels out to 75yds without any problems. This Vulcan also holds my personal best 102yd one-shot, instant lights-out kill of a crow. The only "quirk" to this Vulcan is that the gauge seems to max out at 200bar - I typically fill to 230bar per my tank gauge but rifle gauge doesn't go above 200bar. This is a known thing with this model and AGT sent a replacement gauge to anyone that asked but it never bothered me enough to go through the trouble.
As with all my previous listings, the same disclaimers apply. I haven’t been as active on the forums but many of you know me. I have/had 13+ pages of all positive feedback on the old Yellow BOI as both a buyer and seller; I have a handful of references here and on the new Yellow BOI. I stand behind what I sell and am happy to answer as many questions in as much detail as you need if you’re a serious buyer. I’ve provided a crap ton of really clear, high resolution photos below because I want my buyers to know exactly what they’re buying – please take the time to review them.
Price is ABSOLUTELY FIRM at $OLD. For those that don’t know what firm means or conveniently choose to ignore that statement – it means I won’t take anything less than the stated asking price. I’m not in dire need of the money so I’m not desperate or in a rush to sell. Payment by Paypal Friends & Family is the preferred method. If you’re in the SF Bay Area, I’m happy to meet locally for the exchange so you can fully inspect the rifle and not have to pay any shipping.
https://imgur.com/Eesgarz
https://imgur.com/AlBojzh
https://imgur.com/kr5woIJ
https://imgur.com/Oj6t13E
https://imgur.com/7q5hFcF
https://imgur.com/PhPiCIC
https://imgur.com/as9QffM
https://imgur.com/GA8DNys
https://imgur.com/1n9cqzr
https://imgur.com/klfN5a3
https://imgur.com/W5RxJGb
