Some Leshiy Classic Love - Share Some Pics of Yours

[ctshooter]

While we all wait for the Leshiy 2 to get here, I thought it would be a good time to share some Leshiy Classic love. 

I recently picked up a 250mm .25 barrel after getting a few tins of .25s when I made a purchase of used pellets. Up till now I'd been running 350mm barrels, but having recently received a STO moderator insert I wanted to bring things back down to compact. .25 is a very capable caliber (as I am coming to find) with a decent pellet selection of the H&N FTT 20gr and the JSB 25gr. 

 

[Michael]

That's pretty clean. Lemme see if I can dig up some pics.

 

[ctshooter]

Thanks Michael - your FT Leshiy setup is pretty sick too.

 

[Michael]

Mine have gone thru multiple configurations. The only thing they have in common is that I reverted them all back to ultra light polished single stage triggers.

.22 250mm

.22 250mm & .22 350mm

.177 350mm

-Michael

 

[FearnLoading]

 

[Michael]

That's need. Tell us more about the adjustable stock and how you mounted it.

 

[ctshooter]

Yes - do tell about that stock. Also - which magazine is that?

 

[towle]

My two babies, nothing fancy, like to keep them light

Front, .22 cal, Edgun reg. at 130 Bar, HST 25, JSB Exact 1.03 gram at 260 m/sec
Holosun HS510C Circle Dot Open Reflex Sight
Weight total 1679 gram

Back, .177 cal, Edgun reg. at 130 Bar, HST 15, JSB Exact 0,547 gram at 295 m/sec
Dedal Stalker with flip-ups
Weight total 1903 gram

 

[Scouty]

CTshooter - what scope is that? Can't tell on my phone. 

Also interested to here about that other stock as well as the foregrip piece. 

I'm in the middle of moving so mine are packed away still. 

 

[ctshooter]

Scouty - It's a MarchF 1-8x I purchased from another member here. 

 

[Peskådot671]

Nothing too flashy and it's just the way I like it. 

 

[foundrypress]

I’ll never stop loving my silver .25!

-Kevin. 

 

[JT207]

25Cal 350mm

 

[IvanM]

 

[Leatherman]

I may have to get me the classic original Leshiy too after seeing these. Keep it short for backpack gun. I have the Leshiy 2 coming in .22 x 350mm and a .30 barrel x 450mm Both with the Shopot forearm and moderator. I want to see how easy it will be to change barrels first. Did you all notice Ed changed the barrel to have a stop ring on the breech end. Now the barrel will only go in and come out the breech side. And hopefully the stop ring is a positive index for the breech speeding up the process. I hope they get here soon.

 

[FearnLoading]

That's need. Tell us more about the adjustable stock and how you mounted it.

The stock is a Chinese copy of the Strike industries Stock. If you look up Strike Industries you will find it. The Chinese copy is available on Ali express. Installing it was a pain. Had to remove the magnet band to be able to put the stock on. The magnet band is not stuck to the tank. There is an oring inside which keeps the band on tight. Had to give it to someone who made a circular bracket and knocked the magnet band off with a rubber mallet. Basically keep nudging the magnet band till it comes off the other end of the tank. Only then was the stock able to fit. Pain to remove but well worth it. It shoulders much better now. Also got a hole drilled in the stock so I can fill air easily without having to remove the stock . The magazine is a pellet holder made in Russia. I had the Huma one also. But this design is far far better. It mounts right next to the breach and you can take one pellet at a time and load directly into the barrel end. Look up a guy called Pechto on Insta. 

 

[zx10wall]

.22 Leshiy. Additional Hagan tube, Radom vertical front grip. CARM butt stock extension & pellet dispenser. 

 

 

[FearnLoading]

This is another set up prior to changing the stock 

 

[LessMundane]

Working on a pellet dispenser.

 

[Elbowgrease]

Love mine. No real interest in the Leshiy 2. The Leshiy 2 just seems to throw out the simplicity that makes the original so special.