Steyr Steyr LP 10 Not dislodging palettes.

[Bimbi]

Hello Members,
I recently bought a pre owned Steyr LP 10. The issue I'm having is that when I try to shoot the gun with a palette inside, it does not shoot at all. There is only a muffled PUFFFT sound. If you have had this issue or know what possibly could make it fire again, please share your inputs.
Thank you very much.

 

[stateofmisery]

Where is the puffft sound coming from? Is it possible you have a pellet stuck in the barrel. Mark

 

[Bimbi]

Thanks. No palettes stuck inside the barrel other than what I put in when I try to shoot. I have to take the palette out by pushing it from the front side of the barrel.

 

[beerthief]

what pellet are you trying to use ?

 

[jarmstrong]

did you put pressurized air in to it?

 

[Bimbi]

did you put pressurized air in to it?

Yes sir. At 160bars

 

[Bimbi]

what pellet are you trying to use ?

I tried a few different ones. It doesn't seem to make a difference.

 

[nervoustrig]

Might you have it set to dry-fire mode?

from

Steyr LP 10 - Wikipedia

en.m.wikipedia.org

“The trigger mechanism also has dry fire capability. Dry fire means a shooter can practice/simulate shooting without actually firing a pellet or seeping any air from a mounted pre-compressed air cylinder.“

 

[Bimbi]

I'm making sure it is not in dry fire mode by bringing the cocking lever all the way down. Thanks

 

[nervoustrig]

Got it, that would have been too easy, right?

The description sounds like valve lock, which means the hammer cannot strike the valve stem hard enough to properly knock open the valve. There are a number of potential causes, among them:

• regulator seal failure that is causing the valve to see full reservoir pressure
• foreign object (e.g. pellet) trapped in front of the hammer
• valve stem failure
• trigger malfunction
• hammer spring tension is out of adjustment