Survivalist pellet mold

[Septicdeath]

 

materials.

6.35 mm drill bit

6.25 mm drill bit

1) pliers

2) 2pcs. dill bits ( 1 smaller than the cal. and the other the same as cal.)

3) vice or vicegrip

4) drill
clamp the pliers with a vice grip
make a punch on the desired location
drill the pliers using the small drill bit.
make sure that you do not drill through. once in a while open the pliers to see your progress.
again clamp the drilled pliers.
drill the opening with the big drill bit with a depth of 1mm or more.

 

[Vadimas]

 

[Septicdeath]

Yes I could buy one but making things, experimenting, and knowing how to build things yourself is more satisfying. They may not shoot in tight little groups but will not your six inch target at 40 yards.

 

[Vana2]

@Septicdeath

NICE!! I'm a compulsive tinker and can appreciate something like this!

How do you control the pellet length? Fill to depth wanted or overfill and trim to size?

Thanks for sharing!

Hank

 

[Septicdeath]

@Septicdeath

NICE!! I'm a compulsive tinker and can appreciate something like this!

How do you control the pellet length? Fill to depth wanted or overfill and trim to size?

Thanks for sharing!

Hank

Try to pour to rim then sort pellets