Taipan Taipan Veteran 2 .25 550mm stock tune?

[MushroomPsyche]

For those of you who have the Taipan Veteran 2 550mm Tactical .25, what FPE tune does it come in stock? Also, what's the regulator set at from the factory? If I get it, I really don't feel like taking it apart to tune the regulator so I might just buy pellets of the appropriate weight and just fine tune the hammer spring tension.

Also, when shooting slugs, do most of you just use the single shot tray instead of the magazine? It seems the magazine is not really well designed for slugs.

 

[Slyde]

Not sure if this helps being I have the .25 V2T with a 700mm barrel. But when I talked to Taipan about their regulators, they told me they send them out at 135bars because they found that to be the best all around setting for air consumption and energy. They made no distinction between barrel lengths.

As far as slugs, I’ve been having good luck with Zan 37’s using the single shot loader. Haven’t used the mags yet.

Brian

 

[MushroomPsyche]

Not sure if this helps being I have the .25 V2T with a 700mm barrel. But when I talked to Taipan about their regulators, they told me they send them out at 135bars because they found that to be the best all around setting for air consumption and energy. They made no distinction between barrel lengths.

As far as slugs, I’ve been having good luck with Zan 37’s using the single shot loader. Haven’t used the mags yet.

Brian

Thank you for the comment. Yes, I recently bought a .22 Standard version 1 and the regulator was set to 135 bars as well. The .22 Long I bought 4 years ago had the regulator set closer to 150 bars.