Taipan Veteran .25 O-Rings

[Pepitto]

Greetings to all the owners of this beautiful gun.

Recently noticed an air leak on my Taipan Veteran .25.

Maybe someone had the same problem and can tell me the correct O-Rings sizes and where can I buy it?

Thank you in advance.

 

[mmahoney]

Here is a screen shot of the manual that says the sizes. I'll also PM the entire manual to you.

 

[terrible_t]

I also had 1 on the quickfill tear on me...any info on that size?

 

[Pepitto]

Thank you for the information.

I see all sizes except one. o-ring part number 96 for the pressure gauge. how to find out its size.

I want to replace everything at once. to avoid repeated disassembly of the rifle.

 

[Pepitto]

I also found this information on another forum. perhaps someone will be useful, too.

O-ring list for the mutant (found on another forum).



21 X 3 Seal rear / front stopper tank 1 each and Regulator OD x2
13.5 X 2 ​​Seal valve body 
12.5 x 2 ​​Seal the barrel on the receiver

4.47 x 1.78, -008. (.177) Probe Seal x2
5.28 x 1.78. -009. (.22) Probe seal X2

9.25 x 1.78. -012. pressure gauge
4.47 x 1.78. -008. filling nozzle 

23 x 1.5 (.177) magazine od x2
1.5 x 24 (.22) magazine od x2

Regulator. 
2.9 x 1.78 -006 Nozzle gear
12.42 x 1.78 -014 sleave. 
6.07 x 1.78 -010 Piston reducer *Buno 70 polyurethane*
2.9 x 1.78 -006 Piston reducer *Buno 70 polyurethane*

 

[mmahoney]

The 9.25 x 1.78. -012 o-ring for the Mutant's gauge is likely the same for the Veterans.

The fill probe is the 4.47 x 1.78

 

[Pepitto]

I found all the rings in Hardware Seals.

These are classic SAE sizes, only tranfer to metrics.

For example: 

4.47x1.78 is 3/16x1/16,

9.25x1.78 is 3/8x1/16,

21x3 is 13/16x1/8

 

[DarrellS]

Thank you for this information .