Epic teardown and barrel slugging of epic 2

My buddy Steve just uploaded 2 great videos on the epic 2. Since there was so much info, it made for an extremely long single video. So we decided on 2 seperate vids just under 30 minutes each. Steve does all the recording and editing work. I don't know how to bring these youtube videos here, But others do. They are under "air velocity sport", Part 1 is the teardown. part 2 is slugging barrels and shooting groups. If anyone can upload them here from youtube, great! Otherwise, check them out and enjoy on youtube.
 
I look forward to watching these. I almost picked one of these up from EdgunWest when he had them on sale, but they don't offer a barrel length that I want. I wish they offered a size between 12" and 21". I want more efficiency than a 12" offers, and I want a shorter rifle than what the 21" barrel requires - bummer. They look like really solid rigs!
 
The click ball on my hammer spring adjuster have a tendency to back out, so need to put something on the grub screw thread to "lock " it in place.

PS: the guy pushing out the cross pins in the cocking linkage, there is a reason they are threaded and the rifle come with a long 3 mm bolt, you insert that / screw bolt into the 2 cross pins in the linkage and fish them out the hole in the top.

boldt.jpg


I would not use names here CUZ it also took me a little while to figure out what the hell that long 3 mm bolt was for.

Adjusting dwell timing on the valve on my .177 700 mm Two, i found going either way a little did not matter much, and going too far was no good.
Too far = 1 mm

So at least on a long Two i find that adjustment a bit flawed, and so i do not touch it
but it is my understanding sub12 airgunner gained a bigger shot count by adjusting that screw, but he also had a compact version.
 
Last edited: