FX Testing FX Boss Regulator ???

[SilentSquirrel]

Hello members
I'd like to test the regulator in my FX Boss
And I have a HUMA Regulator Tester
Does anyone know of an adapter that would fit the FX regulators into the HUMA tester?

For clarity
Please understand I am not referring to the adapters HUMA makes for testing their FX regulators

Thanks
Edward

 

[ThE PuNiShEr]

Здравей, мисля, че не се произвежда такъв адаптер. Ако имаш човек със струг , може да ти изработи и си остане вечно твой. Малко скъпо удоволствие но ......

 

[SilentSquirrel]

Hello, I think no such adapter is produced. If you have a person with a lathe, he can make it for you and remain yours forever. A bit of an expensive pleasure, but ......

Здравей, мисля, че не се произвежда такъв адаптер. Ако имаш човек със струг , може да ти изработи и си остане вечно твой. Малко скъпо удоволствие но ......

Отлична идея
Въпреки това се надявам да намеря някой, който вече е направил
Благодаря ви Google Translate

Excellent idea
However , I am hoping to find someone who has already made one
Thank you Google Translate

Edward

 

[Gerry52]

My 2 cents? Get a Huma HP reg for the Boss. Have the Huma folks set it for 160bar (per Ernest Rowe's video). You'll be amazed at power & shot count increase! Best thing I've done for my Boss. I think reg is less than $80. I did it a couple summers ago & still amazes me.

 

[SilentSquirrel]

My 2 cents? Get a Huma HP reg for the Boss. Have the Huma folks set it for 160bar (per Ernest Rowe's video). You'll be amazed at power & shot count increase! Best thing I've done for my Boss. I think reg is less than $80. I did it a couple summers ago & still amazes me.

I've watched that video @Gerry52
And agree it is a good idea to go with HUMA
I will most likely do that
But, on principle, I want to test the FX regs and rebuild at least one of them.
Edward

 

[Gerry52]

When my Boss was acting squirrelly I rebuilt the OEM twice but couldn't get it right, decided on replacement with the Huma on Centercut's suggestion. Glad I listened. Just a heads up, some rebuild kits for the Boss DON'T include the exterior reg o-rings! They're 11.91x2.62 Buna 70.

 

[SilentSquirrel]

When my Boss was acting squirrelly I rebuilt the OEM twice but couldn't get it right, decided on replacement with the Huma on Centercut's suggestion. Glad I listened. Just a heads up, some rebuild kits for the Boss DON'T include the exterior reg o-rings! They're 11.91x2.62 Buna 70.

Good to know
Thanks, Gerry
Edward