Airforce Texan valve tunning shematic

[manoy]

hi folks;
i need some pics of texan or tunned african model of texan 357to50 valve ; i mean inside parts channel of airflow.
if any one can send pictures or tell me the exact size of below shematic
thanks;

 

[manoy]

No photos of Texan valve ?

 

[ToddGeddes63]

Call Airforce air guns, Thay will have the information you want.

 

[manoy]

i just need poppet and stem channel size ; i work with my own cnc lathe and my goal is highst vekocity with minimum air usage

 

[Airgunmann]

i just need poppet and stem channel size ; i work with my own cnc lathe and my goal is highst vekocity with minimum air usage

.136 was drill bit size i used for peek poppet it uses a small v shape for support against the plastic then it goes to top an threads in the stem i .136 about the whole way except the support at the poppet

 

[Airgunmann]

Straight line valve had a lot going for it so what you want measurements so u can copy it good luck

 

[manoy]

Straight line valve had a lot going for it so what you want measurements so u can copy it good luck

lets take a look;
.323 hole size with .45 stem and tophat
i reached around 1000fps with ultra heavy bullets 4500psi

 

[Airgunmann]

The smaller the poppet the easier it opens just need to be careful not to over do it and use a tough plastic but the in line valve is powerfull and efficient

 

[Airgunmann]

Texan valve is like that not a very good drawing sorry

 

[manoy]

Texan valve is like that not a very good draw