i am not sure which dual v2 port to order- with barrel attachment or with no barrel attachment?
Upvote 0
FX The Dreamline Lite .30cal is finally here- and i have some questions, please help!
- Thread starter grzech2005
- Start date
Upvote 0
i got this narrowed down to these 3 items but one v2 port is right and one is wrong- but i am not sure which, maybe i get both and return one unused.. or maybe take the gun apart and see what i have inside- but how to do it?
Upvote 0
There will be instructions with the parts. The spring you just remove the power wheel assembly and swap it out. Very simple.
The transfer port, just pull the barrel. It'll unscrew from the barrel assembly. Unless you have the super light barrel. Then you're looking at a little more and you'll have to kit the super light high flow kit. Which include everything you need
Upvote 0
take shroud off- never done it.. you mean just take off the entire barrel assembly which i did when i put in the bottle adapter or take the barrel assembly out and pull the barrel out of the shroud?
i guess you want me to just pull the entire barrel assembly out of the gun and make a photo of the breech- the hole where the barrel assembly goes in..
Upvote 0
i just ordered the valve seat in spain- 26euros
the other 2 items- pellet power kit and the port v2 i will order tomorrow after we confirm which v2 port i need- the one with barrel attachment or without..
Upvote 0
No. The shroud, the black aluminum tube that is the outside of the barrel assembly, it houses the liner. It should twist off. It looks like you have the super light barrel.
FX Dreamline Superlight Caliber Exchange Set with V2 Dual Hole Transfer Port and High Flow Pin- or Pellet Probe
FX Dreamline Superlight Caliber Exchange Set with V2 Dual Hole Transfer Port and High Flow Probe
huma-air.com Youll probably need this, but tomorrow when you've taken your shroud off well know for sure
Your dreamline looks like the newer version. (Made after Sept 2021). One version had a different barrel with a different liner fastening system. Ours have one that's quite different, the liner is secured into the breech. And the barrel connection and tp assembly are one piece, we will see tomorrow
Upvote 0
i just bought it new few weeks ago, its newNo. The shroud, the black aluminum tube that is the outside of the barrel assembly, it houses the liner. It should twist off. It looks like you have the super light barrel.
FX Dreamline Superlight Caliber Exchange Set with V2 Dual Hole Transfer Port and High Flow Pin- or Pellet Probe
FX Dreamline Superlight Caliber Exchange Set with V2 Dual Hole Transfer Port and High Flow Probe
Youll probably need this, but tomorrow when you've taken your shroud off well know for sure
Your dreamline looks like the newer version. (Made after Sept 2021). One version had a different barrel with a different liner fastening system. Ours have one that's quite different, the liner is secured into the breech. And the barrel connection and tp assembly are one piece, we will see tomorrow
Upvote 0
That means nothing. Places have them in stock for a while sometimes. Sometimes old stock are shipped. I could tell by the barrel and tube.
Upvote 0
ok. .i found some pics from few days ago, check out the barrel when i had it on the table- it looks like a dual v2 transfer port with a bridge- don't it?
and check the tube before i replaced it with bottle
Upvote 0
It looks like it, but the Huma version is called hi flow because there is more material removed over the stock. More air flows. It makes a difference. It's not the same.
Upvote 0
aha-ok, got ya.. i will buy it gladly--
check out the text i found at the dealers website- it tells what has been restricted- but it doesn't say the spring was reduced... maybe it is an original spring and it says that it will make 80-110j when opened with the 2 parts included..
and i did make 80j today but---- its too little for me (770fps is to slow), i want 110j with 950 fps or soo! so lets modify this stupid fx gun all the way up
Upvote 0
yes- you right.. 920fps would be plenty but will i get there.. hmm, i hope
check out this pic- this i super light barrel system- i don't have such- fx crowns use them
Upvote 0
Upvote 0
The dreamline and crowns use different shrouds. They use the same liner lock and barrel connection. They are both a thin aluminum shroud, with a liner locked into the breech, not secured by a threaded jam nut from the front of the barrel shroud. The super light is the liner centered by bushing discs inside the light hollow shroud. That carbon fiber tube is a barrel sleeve.i have the damn thing on my gun.
Upvote 0
i just hope i don't have the light barrel because you said its harder to work on as the normal barrel, that's all.. i might not do it if its to hard- and here is no one to help, no dealer, no gunsmith hence illegal
Upvote 0