Theoben rapid 7 won’t fire

[Jimbok]

I have filled my bottle to 220 bar and attached it to the gun, I then try a dry fire and there is no air release.
The rifle was taken apart to the main components recently this is removing trigger mechanism, barrel, stock and reassembled.
Can anyone guide me as to what might be the issue and how I can rectify the situation.
Thanks

 

[Ca_Varminter]

That is Good news you Got your Rapid up and shooting!!!!!
Nothing is more sad than a Sick Rapid!!

I am curious though as to how the air gets behind the pellet to propel it as the hole appears to be forward on the pellet.

The Bolt on the Rapid has an Inner and Outer Probes.
The Outer creates the seal on the Breech of the barrel.
The inner probe will push the pellet Past the Through Port!!

 

[Jimbok]

That is Good news you Got your Rapid up and shooting!!!!!
Nothing is more sad than a Sick Rapid!!


The Bolt on the Rapid has an Inner and Outer Probes.
The Outer creates the seal on the Breech of the barrel.
The inner probe will push the pellet Past the Through Port!!

Ahh now I get it, every day is a learning day.
Than you