Thor press pellets

[928487381]

This is the Thor press pellets I'm designing. It's not finished yet and is a bit complicated. I'd like to think of a better way to achieve an adjustable weight, just like our Thor press slug. This is just a sharing, not a promotional post. , we will add forum partners in April

 

[928487381]

 

[Squack]

I've looked at many of Thor's products, but for me, it comes down to price. $800+ will buy a lot of pellets.
Then I add my time and wear on parts will it pay for itself in the long run?

 

[928487381]

For the US market, we recommend that you buy a 6 holes pellets mold. The speed of making pellets is about the same as that of 20 holes. The most important thing is that this is a mold specially launched for airsoft shooters. 10 holes and 20 holes are specially made for making pellets. Merchant of pellets for sale
I can't discuss price here, sorry. This is a picture of 6 holes
The molds we make have no service life, the manufacturing standards are very high, the precision reaches +0.005MM, and the finish is as smooth as a mirror


With correct operation, it can be used for a lifetime without damage. We use HRC55 degree 440C stainless steel to make the mold. The mold is extremely difficult to rust.

 

[Grassguy12200]

For the US market, we recommend that you buy a 6 holes pellets mold. The speed of making pellets is about the same as that of 20 holes. The most important thing is that this is a mold specially launched for airsoft shooters. 10 holes and 20 holes are specially made for making pellets. Merchant of pellets for sale
I can't discuss price here, sorry. This is a picture of 6 holes
The molds we make have no service life, the manufacturing standards are very high, the precision reaches +0.005MM, and the finish is as smooth as a mirror


With correct operation, it can be used for a lifetime without damage. We use HRC55 degree 440C stainless steel to make the mold. The mold is extremely difficult to rust.
View attachment 446173

View attachment 446174

View attachment 446175

I’m interested. Pm me

 

[piframbo]

une vidéo pour le fonctionnement des moules.
j'ai vue,il ya longtemp des moules ,utilisée avec un etau !!
les presses sont tres cher .

 

[allinssd]

Prices are too high for what you offer. I bought a jig from you and it's ok, but I'd go with corbin before i go with you guys again, i have a few corbins and almost a dozen Dillon presses, your quality is just not there for the prices you charge.

DO BETTER.

 

[928487381]

I’m interested. Pm me

We will join the forum in April, now I can't do any transactions in the forum, this is the forum rules.

 

[928487381]

une vidéo pour le fonctionnement des moules.
j'ai vue,il ya longtemp des moules ,utilisée avec un etau !!
les presses sont tres cher .

This is my youtube channel @ThorMolds

 

[928487381]

Prices are too high for what you offer. I bought a jig from you and it's ok, but I'd go with corbin before i go with you guys again, i have a few corbins and almost a dozen Dillon presses, your quality is just not there for the prices you charge.

DO BETTER.

We do not sell jigs, so you are not our customer
Our molds are unparalleled in terms of materials used and manufacturing precision.

 

[928487381]

I facilitate all customer service shipping records, there is only one customer in California who purchased a .357 20 holes pellets mold, 1 hole .357 slug molds with us, so you are not our customer.

Prices are too high for what you offer. I bought a jig from you and it's ok, but I'd go with corbin before i go with you guys again, i have a few corbins and almost a dozen Dillon presses, your quality is just not there for the prices you charge.

DO BETTER.

 

[piframbo]

desolee,je cherche des infos sur cela:

249CAL 26.8gr 1,73 g matrice de forgeage à la main motif matrice d'estampage de précision moule Slug moule en acier en stock​

 

[928487381]

desolee,je cherche des infos sur cela:

249CAL 26.8gr 1,73 g matrice de forgeage à la main motif matrice d'estampage de précision moule Slug moule en acier en stock​

Nous pouvons gagner .249 après avoir rejoint le forum

 

[Anton_stz2]

Hi, can you make a die for 62 gauge?

 

[rikkochet]

62 gauge? That's an unusual size.
It's .422" or 10.17mm.

 

[Fareed ahmed]

For the US market, we recommend that you buy a 6 holes pellets mold. The speed of making pellets is about the same as that of 20 holes. The most important thing is that this is a mold specially launched for airsoft shooters. 10 holes and 20 holes are specially made for making pellets. Merchant of pellets for sale
I can't discuss price here, sorry. This is a picture of 6 holes
The molds we make have no service life, the manufacturing standards are very high, the precision reaches +0.005MM, and the finish is as smooth as a mirror


With correct operation, it can be used for a lifetime without damage. We use HRC55 degree 440C stainless steel to make the mold. The mold is extremely difficult to rust.
View attachment 446173

View attachment 446174

View attachment 446175

How can I buy .22 cal pellet mould? Plz tell me