Taipan Time to show my Tactical2 for hunting day and night

[LRP]

700mm LW barrel cal..22
700cc bottle
Huma Air regulator at 160 bar.... ZAN slugs 30,4 grain -1000 fps
Modifid Valve and harder spring, big adjusterknob
Sekhmet gauge
Element 4-24x50 with Pard NV 007lrf Nightvision
Carbon bipod and a lot of other thinks

I´m from Germany and at the moment in Norway

Greetings
LRP

 

[JaceSpace1369]

700mm LW barrel cal..22
700cc bottle
Huma Air regulator at 160 bar.... ZAN slugs 30,4 grain -1000 fps
Modifid Valve and harder spring, big adjusterknob
Sekhmet gauge
Element 4-24x50 with Pard NV 007lrf Nightvision
Carbon bipod and a lot of other thinks

I´m from Germany and at the moment in Norway

Greetings
LRP

View attachment 496210

View attachment 496211

View attachment 496212

Sick build!

 

[Slyde]

That is very cool! Can you give any info on the buttstock?

 

[LRP]

The buttstock is made by GEHMAN and costs 119€ at Frankonia (Huntingshop in Germany). They has a flat mountingplate with two holes for screws.

 

[OneAcreFarmer]

 

[LRP]

When i´m back in Germany is the next step to build a completely new hammervalve and seat with a 8.0 mm bore for 40 grain slugs at 1000 fps/90 footpound.
The limit with the original is 5.5mm. This is the bottleneck against more power on this gun.
A nice side effect is that you no longer have to set such high regulator pressures to quickly press the required amount of air through a small hole.

 

[coastal drifter]

700mm LW barrel cal..22
700cc bottle
Huma Air regulator at 160 bar.... ZAN slugs 30,4 grain -1000 fps
Modifid Valve and harder spring, big adjusterknob
Sekhmet gauge
Element 4-24x50 with Pard NV 007lrf Nightvision
Carbon bipod and a lot of other thinks

I´m from Germany and at the moment in Norway

Greetings
LRP

View attachment 496210

View attachment 496211

View attachment 496212

camo looks good on that gun. Also looks very quiet.

 

[weevil]

Nice rig! Can you tell me how you removed the brass valve seat? I’m sure there’s a set screw holding it in but I can’t see where it is located!

 

[LRP]

It is the srew number 121.

 

[LRP]

Now , i set the regulatorpressure from 160 up to 175 bar and reduce the hammerspring.....same 1000 fps (30.5 grain ZAN Slugs) ...but the gun needs 2 bar per shoot against 5 bar with 160. It works fine for 300 meters. The hammerspring is custommade...not standard, so not comparable.
The biggest factor is the wind at 300 meters.

 

[weevil]

It is the srew number 121.

View attachment 499146

Thanks. Unfortunately, it’s obscured by a linkage…

 

[LRP]

Today i calculate the BC new with the 30.5 Grain ZAN- Slugs. The program tolds me, it`s 0.1480. Start point is 1000 FPS, The Slugs are cleaned in a Ultrasonic cleaner and lubed with Silikonspray. Maybe it will help someone.